225mm Ancon Staifix HRT4/R Stainless Steel Wall Tie - Remedial Wall Tie - Type 4

225mm Ancon Staifix HRT4/R Stainless Steel Wall Tie - Remedial Wall Tie - Type 4
- Product Code: A1-5388
- Delivery Time: 2 - 3 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model and Size: 225mm
Our ratings on 30-06-2025:

4.8 out of 5
225mm Ancon Staifix HRT4/R Stainless Steel Wall Tie - Remedial Wall Tie - Type 4
Length: 225mm
Pack Quantity: 1
Cavity width: 76-100mm
225mm Ancon Staifix HRT4/R Wall Tie is a low conductivity stainless steel masonry remedial wall tie for use in domestic houses up to 10 metres in height. This remedial HRT/R wall tie is used for tying the two leafs of a cavity wall or separating wall where the first leaf has already been built. The wavy end is resin-bonded into the existing wall in a 10mm Ø hole. The triangle end should be pressed down in fresh mortar of the new leaf. Ideally, ties should be installed level or with a slight fall to the outer leaf.
CHARACTERISTICS
- Masonry-to-masonry remedial wall tie,
- For use in domestic houses up to 10 metres in height
- Light duty type 4 wall tie,
- Meets the performance requirement of Approved Document E for use in external masonry walls,
- Suitable for cavities of 76-100mm,
Brand: Ancon
Model and Size: 575mm
Delivery Time: 3 - 5 days
575mm Ancon Teplo-BF-4 Wall Tie is a smart black general purpose composite type 3 wall tie manufactured from pultruded basalt fibres with a thermal conductivity of 0.7 W/mK, which helps to prevent heat escape from the building. The Teplo-BF-4 has specialised moulded safety ends which offer impr..
Guide Price: £5.07
£6.08 inc VAT
Brand: Ancon
Model and Size: 325mm
Delivery Time: 3 - 5 days
325mm Ancon Teplo-BF-2 Wall Tie is a smart black general purpose composite wall tie manufactured from pultruded basalt fibres with a thermal conductivity of 0.7 W/mK, which helps to prevent heat escape from the building. The Teplo-BF-2 has specialised moulded safety ends which offer improved bu..
Guide Price: £2.90
£3.48 inc VAT
Brand: Ancon
Model and Size: 250mm
Delivery Time: 2 - 3 working days
250mm Ancon 63 Mechanical/Mechanical Wall Tie is a masonry remedial wall tie for use for tying together two leaves of solid walls. This MM63 tie has mechanical expanders at each end. Requires 12mm Ø holes. These remedial ties are used on older building, where brickwork had been cracked due..
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31C wall tie is ..
Brand: Ancon
Model and Size: 235mm
Delivery Time: 1-3 working days
235mm Ancon Teplo-BFR Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFR Wall Tie is a 7mm ..
Brand: Ancon
Model and Size: 315mm
Delivery Time: 2 - 3 working days
315mm Ancon Teplo-R Wall Tie is a remedial wall tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It is a plain-ended basalt fibre wall ..