Thistle Hardwall Plaster British Gypsum

Thistle Hardwall Plaster British Gypsum
Price: £13.96 (£16.75 inc VAT)
5 or more £13.73 (£16.48 inc VAT)
10 or more £13.50 (£16.20 inc VAT)
20 or more £13.16 (£15.79 inc VAT)
- Product Code: A1-338
- Delivery Time: Out Of Stock
- Brand: British Gypsum (Tech. support: 01159456123)
- Model and Size: 25kg - bag
- Weight: 25.00kg
Our ratings on 11-07-2025:

4.8 out of 5
Thistle Hardwall Plaster British Gypsum
Weight: 25kg
Thistle Hardwall is a gypsum undercoat plaster for use on most masonry. With a final coat of Thistle Multi-Finish, it provides a smooth, inert, high quality surface to internal walls. The combination has superior impact resistance, earlier surface drying, a higher than normal resistance to efflorescence, and gives a durable base for the application of decorative finishes. Thistle Hardwall is a lightweight, retarded hemihydrate, pre-mixed gypsum plaster, incorporating special aggregates and additives, requiring only the addition of clean water to prepare it for use. It is suitable for application by hand or by plaster projection machine.
APPLICATION
Thistle Hardwall is designed for use on:
- Most masonry walls
- Common brick walls and concrete bricks (with raked joints)
- Dense aggregate and lightweight aggregate concrete block
- Aerated concrete blocks (pre-treatment may be necessary to control high suction)
- No-fines concrete
- Provides durable base for the application of decorative finishes
CHARACTERISTICS
- Thistle Hardwall with a final coat of 2mm Thistle Multi-Finish provides a plastering system suitable for high impact / wear areas
- Tiles up to 20kg/m² can be applied directly to Thistle finish. Tiles should not be applied directly to Thistle undercoats, with the exception of Thistle Dri-Coat
- Can be decorated with most paint finishes and wall coverings. Will accept the majority of wall covering adhesives
- Provides good fire protection due to the unique behaviour of gypsum in fire
- Dry bagged plaster is not affected by low temperatures
- Finish using Thistle Multi-Finish
CERTIFICATES
Thistle Hardwall complies with:
- EN 13279-1 types B4/20/2 and C3/2
- ISO 9001: 2000
Brand: British Gypsum
Model and Size: SIF5 - 55mm
Delivery Time: 3 - 5 days
55mm British Gypsum GypFloor SIF5 Floor Screws is used to fix floorboards through Gyproc Plank into the Gypframe SIF channel to prevent impact sound transmission in floating floors. They are electro zinc-plated to prevent corrosion, self-tapping for rapid installation, and have a countersunk head to..
Brand: British Gypsum
Model and Size: G102 - 2.4 m
Delivery Time: 2 - 3 working days
British Gypsum Gypframe Shaftwall G102 Retaining Channel is one of the available Gypframe channels, especially designed to be used with the ShaftWall System, a lightweight system which can be installed in the early construction phase, especially applicable to areas with limited access..
£58.33
£70.00 inc VAT
Brand: British Gypsum
Model and Size: 48 S 50 'C' Stud - 3.6 m
Delivery Time: 3 - 5 days
British Gypsum Gypframe 48 S 50 3.6 m 'C' studs are especially designed for smooth board alignment and increased strength. Their spaced structural apertures make the services routing much easier and their diversity makes them applicable to different height, strength, acoustic insulation..
£8.35
£10.02 inc VAT
Brand: British Gypsum
Model and Size: 48 I 50 'I' Stud - 3 m
Delivery Time: 2 - 3 working days
British Gypsum Gypframe 48 I 50 3 m 'I' studs provide additional impact resistance due to the improved strength, unlike any other available Gypframe studs. They are usually used in systems with paramount board fixing strength, allowing increased partition height, but retaining the same par..
£163.12
£195.74 inc VAT
Brand: British Gypsum
Model and Size: PIR - 63mm
Delivery Time: 1 - 5 working days
63mm Gyproc Thermaline PIR Insulated Plasterboard consists of a 12.5mm Gyproc WallBoard factory bonded to a 50.5mm rigid polyisocyanurate foam (PIR) with a multi-layer Kraft/aluminium facer on both sides of the insulation board and conforms to BS EN 13950. Gyproc ThermaLine ..
£133.54
£160.25 inc VAT
Brand: British Gypsum
Model and Size: 1200x2400mm - 2.88m2
Delivery Time: 1 - 2 days
12.5mm Gyproc SoundBloc consists of an aerated gypsum core with glass fibre, water repellent and other additives encased in, and firmly bonded to strong paper liners--blue face paper, brown reverse side paper. This board is specially designed for use in heavy use areas where greater levels of sound ..
£17.37
£20.84 inc VAT