Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Price: £541.60 (£649.92 inc VAT)
Price per m2: £1.93/m2 (£2.32 inc VAT)
- Product Code: A1-2590
- Delivery Time: 2 - 3 weeks
- Brand: British Gypsum (Tech. support: 01159456123)
- Model and Size: 1400kg - pallet of 56
- Weight: 999.99kg
Our ratings on 01-08-2025:
4.8 out of 5
Gyproc Soundcoat Plus - Parge Coat - 25kgs - pallet of 56
Weight: 999.99kg
25kg Gyproc Soundcoat Plus will improve energy and acoustic performance, lower heating costs, reduced CO2 emissions and greater comfort for its occupants. It has been specially formulated to enable application on to aircrete blocks, as well as aggregate. The parge coat of Gyproc Soundcoat Plus would minimise air leakage, thus improve the thermal and acoustic performance of the masonry walls.
A parge coat is a thin coat of mortar applied to concrete or masonry for refinement of the surface. The intent is to create a contiguous surface by filling surface air voids and bug holes, to level a rough surface, or to prep a surface for top coating with a high-performance protective coating.
CHARACTERISTICS
- Provides an effective airtight seal, reducing energy consumption.
- Cost effective solution.
- An integral product for the robust design of energy efficient dwellings.
- Enhances the acoustic performance of masonry separating walls.
- Coverage is 5m2 per bag at 6mm thick.
APPLICATION
- A continuous coating of minimum 6mm is applied by hand or suitable spray.
- Trowelling flat is not required.
CERTIFICATES
- Conforms to EN 13279-1.
Gyproc-Soundcoat-Plus-Brochure.pdf
Brand: British Gypsum
Model and Size: Plus - 27mm
Delivery Time: 2 - 3 working days
27mm Gyproc Thermaline Plus is a 9.5mm Gyproc wall board factory-bonded to a 17.5mm extruded polystyrene insulant that is both CFC and HCFC-free. The Gyproc board consists of an aerated gypsum core encased in, and firmly bonded to, strong paper liners. The extruded polystyrene insulant is then furt..
£59.02
£70.82 inc VAT
Guide Price
Brand: British Gypsum
Model and Size: 25kg - bag
Delivery Time: Out Of Stock
Thistle Multi-Finish is a gypsum finish plaster for use on a wide range of backgrounds. It provides a smooth, inert, high quality surface to internal walls and ceilings, and a durable base for the application of decorative finishes. Thistle Multi-Finish is a retarded hemihydrates, pre-mixed gypsum p..
Guide Price: £9.37
£11.24 inc VAT
Brand: British Gypsum
Model and Size: 92 S 50 'C' Stud - 4.2 m
Delivery Time: 2 - 3 working days
British Gypsum Gypframe 92 S 50 4.2 m 'C' studs are especially designed for smooth board alignment and increased strength. Their spaced structural apertures make the services routing much easier and their diversity makes them applicable to different height, strength, acoustic insulati..
£165.90
£199.08 inc VAT
Brand: British Gypsum
Model and Size: 25kg - bag
Delivery Time: 1 - 2 days
Gyproc Dri-Wall Adhesive is a general purpose gypsum-based adhesive for use with DriLyner systems, on high, medium or low suction backgrounds. Gyproc Dry-Wall Adhesive is a stable product with no known adverse environmental effects. In general the product comprises calcium sulphate hemihydrate and l..
£12.24
£14.69 inc VAT
Brand: British Gypsum
Model and Size: 146 S 50 'C' Stud - 3.6 m
Delivery Time: 2 - 3 working days
British Gypsum Gypframe 146 S 50 3.6 m 'C' studs are especially designed for smooth board alignment and increased strength. Their spaced structural apertures make the services routing much easier and their diversity makes them applicable to different height, strength, acoustic insulati..
£168.69
£202.43 inc VAT
Brand: British Gypsum
Model and Size: 1200x3000mm - 3.6m2
Delivery Time: 3 - 5 days
12.5mm Gyproc WallBoard Duplex is used for wall and ceiling linings where vapour control and plasterboard lining are required in one fixing operation. Gyproc WallBoard duplex consists of an aerated gypsum core encased in, and firmly bonded to, strong paper liners and backed with an additional metali..