12.5mm Gyproc Wallboard Duplex 1200x3000mm
12.5mm Gyproc Wallboard Duplex 1200x3000mm
- Product Code: A1-2042
- Delivery Time: 3 - 5 days
- Brand: British Gypsum (Tech. support: 01159456123)
- Model: 1200x3000mm - 3.6m2
- Weight: 28.80kg
Our ratings on 18-11-2026:

4.8 out of 5
12.5mm Gyproc Wallboard Duplex 1200x3000mm
Width: 1200mm
Length: 3000mm
Board Coverage: 3.6m2
Density: 640kg/m3
Weight/m2: 8kg
Weight: 28.8kg
Thermal Conductivity: 0.250W/mK
R-Value: 0.41m2K/W
Fire Rating (Reaction to Fire): B(Class 0)
Surface Spread of Flame: Class 1
12.5mm Gyproc WallBoard Duplex is used for wall and ceiling linings where vapour control and plasterboard lining are required in one fixing operation. Gyproc WallBoard duplex consists of an aerated gypsum core encased in, and firmly bonded to, strong paper liners and backed with an additional metalised polyester film. It is suitable for drylining internal surfaces and is certified to BES 6001 achieving a rating of ‘Excellent’. Plasterboard linings provide good fire protection owing to the unique behaviour of the non-combustible gypsum core when subjected to high temperatures. Linings: ivory face paper and metalised polyester film reverse.
- Non-combustible,
- Superior acoustic performance,
- High moisture resistance,
- High density,
- Easy to handle and work with,
- Has a face to which suitable gypsum plasters or decoration may be applied,
- ACTIVair technology is available with this board.
12.5mm Wallboard Duplex is not suitable for use in temperatures above 49°C, but can be subjected to freezing conditions without risk of damage. It is unsuitable for use in areas subject to continuously damp or humid conditions and must not be used to isolate dampness.
INSTALLATION- 12.5mm Gyproc Wallboard Duplex may be cut using a plasterboard saw or by scoring with a sharp knife and snapping the board over a straight edge.
- Holes for switch or socket boxes should be cut out before the boards are fixed using a utility saw or sharp knife.
- Fix boards with decorative side out to receive joint treatment or a skim plaster finish. Lightly butt boards together. Never force boards into position. Install fixings not closer than 13mm from cut edges and 10mm from bound edges.
- Position cut edges to internal angles whenever possible, removing paper burrs with fine sandpaper.
- Stagger horizontal and vertical board joints between layers by a minimum of 600mm.
- Locate boards to the centre line of framing where this supports board edges or ends.
- The face (ivory side) can be plastered with either Thistle Board Finish ;Thistle Multi-Finish or Thistle DuraFinish .
- There should be the minimum of delay between completion of the lining and the commencing of plastering.
- BS 476: Part 6: 1989 Method of test for fire propagation for products,
- BS 476: Part 7: 1997 Surface spread of flame tests for materials,
- EN 13501-1: 2007 + A1: 2009
Brand: British Gypsum
Model: 1800x900mm - 1.62m2
Delivery Time: 3 - 5 days
12.5mm Gyproc WallBoard Duplex is used for wall and ceiling linings where vapour control and plasterboard lining are required in one fixing operation. Gyproc WallBoard duplex consists of an aerated gypsum core encased in, and firmly bonded to, strong paper liners and backed with an additional metali..
Brand: British Gypsum
Model: 60mm x 25m
Delivery Time: 3 - 5 days
60mm British Gypsum Glasroc X Sealing Tape White is a high‑performance, weather‑resistant sealing tape designed specifically for use with Glasroc X Sheathing Board. It protects exposed board joints and cut edges during the construction phase, helping maintain the board’s performance while the perman..
£42.03
£50.44 inc VAT
Brand: British Gypsum
Model: Plus - 35mm
Delivery Time: 2 - 3 working days
35mm Gyproc Thermaline Plus is a 9.5mm Gyproc wall board factory-bonded to a 25.5mm extruded polystyrene insulant that is both CFC and HCFC-free. The Gyproc board consists of an aerated gypsum core encased in, and firmly bonded to, strong paper liners. The extruded polystyrene insulant is..
£66.46
£79.75 inc VAT
Brand: British Gypsum
Model: Super - 80mm
Delivery Time: 3 - 5 days
80mm Gyproc Thermaline Super Insulated Plasterboard is a highly efficient rigid WallBoard board bonded to phenolic foam insulant offering vapour control and fire resistance. It is also highly environmentally friendly, manufactured without harmful agents such as CFC and HCFC. The ..
Brand: British Gypsum
Model: GA4 - 3660 mm
Delivery Time: 1 - 2 days
British Gypsum Gypframe GA4 Steel Angle is a specially designed product which provides additional support, strength, and protection to ceiling, wall and encasement framing constructions.The product can be used in various systems, i..
£151.91
£182.29 inc VAT
Brand: British Gypsum
Model: GL1 - 2.4m
Delivery Time: 1 - 2 days
British Gypsum Gyplyner GL1 2.4m Lining Channel is one of the GypLyner UNIVERSAL channels with very wide application, designed to ease the plasterboard lining installation process onto timber joists, concrete soffits, masonry walls, as well as for steel beams and columns enc..
£55.16
£66.19 inc VATRelated Products
Brand: Various Manufacturers
Model: Wallboard Strips
Delivery Time: 2 - 5 working days
Cut to Size Wallboard Strips for Deflection Heads are used in plasterboard partitions to allow for movement - up, down or both within the structure at..
Categories
- British Gypsum Internal Partitions and Wall Systems
- GypWall Curve
- GypWall Secure System
- GypWall Single Frame
- GypWall Single Frame Enhanced
- DriLyner Fix Direct Linings System
- GypLyner Independent Internal Wall Lining System
- GypLyner Single Internal Wall Lining System
- Gypsum Based Boards
- Wall Insulation
- Partition Wall Insulation
- Dry Lining
- All Products
