British Gypsum ThistlePro PureFinish Plaster- 25kg - Pallet of 56

ThistlePro PureFinish is a gypsum finish plaster for use on a wide range of backgrounds. It provides a smooth, inert, high quality surface to internal walls and ceilings, and a durable base for the application of decorative finishes. Thistle PureFinish is a retarded hemihydrate, pre-mixed gypsum plaster, requiring only the addition of clean water to prepare it for use. The ACTIVair technology within Thistle PureFinish absorbs and converts formaldehyde into non-harmful inert compounds.

• Concrete,
• Brick,
• Blockwork,
• Sand/cement background,
• Expanded metal lath,
• Plasterboard,
• On Glasroc Multiboard, Glasroc F Firecase and Rigidur H

• Bags should be stored dry, as absorption of water shortens the setting time, causes set lumps to form in the bags and may reduce the strength of the set plasterwork,
• Skim finishing using Thistle PureFinish should be to the smooth face of the board,
• Thistle plasters should be mixed by adding to clean water in clean mixing equipment. Contamination from previous mixes adversely affects the setting time and the strength. Fresh contamination has more effect than old, so equipment should be washed just after mixing rather than just before.
• Plaster is applied with firm pressure, built out to the required thickness in two applications and trowelled to a smooth matt finish.
• Gypsum-based plasterwork must always be thoroughly dry before decorating, although a coat of permeable paint can be applied in the interim.
• Tiles up to 20kg/m2 can be applied directly to the Thistle PureFinish, except where the system includes a bonding agent.

• ISO 9001:2008 Quality Management System,
• ISO 14001:2004 Environmental Management System,
• BES 6001:Issue 2 Responsible Sourcing of Construction Products,
• BS OHSAS 18001:2007 Occupational Health and Safety Management