Menu
Your Cart

Insulation Fixings

The external insulation panel has its own weight, which is transferred through shearing forces directly onto the wall. Most times, the mortar is the only connection of the wall with external insulation.
There is a technical requirement for the use of insulation fixings during the installation of the external wall insulation (EWI).
The selection of the optimal insulation fixings depend on the substrate. There are specialised types of insulation fixings:

  • for use in ordinary concrete,
  • for use in solid blocks, silica brick, ceramic brick,
  • for use in walls made of hollow bricks or cavity bricks,
  • for use in lightweight concrete,
  • for use in aerated concrete,
  • for use in wood. 

Since the resistance to load and displacement under load depends solely on the substrate, to assess the properties of the insulation fixings in substrates such as cavity bricks, chequer bricks or hollow blocks, old substrates etc, tests should always be carried out on site. The mechanical insulation fixing is the only element that counteracts all forces that affect the external insulation system (EWI). The entire weight of the elevation and protection against wind suction forces rests on the insulation fixing, so it is very important to select the optimal anchoring.

     Proper way of installing - full facing of the insulation fixing plate with the layer of insulation

INSTALLATION

  • For insulation fixings, where you use only a mechanical drill and hammer to push it in. Friulsider FPR Insulation Fixings.Suitable for solid concrete,  solid brick and solid stone substrates.

            

                                 

  • Hammered-in expander nail fixing for EWI systems. Friulsider ISOFAST Insulation Fixings. Suitable for use in concrete, solid brick, solid stone, honeycomb brick, cell like clay brick, hollow aggregate brick, aerated concrete substrates.

              

  • Screw-in fixing for EWI systems. Suitable for use in concrete, solid brick, solid stone, honeycomb brick, cell like clay brick, hollow aggregate brick, aerated concrete substrates.

              

CHOOSE MANUFACTURERS or scroll down to see products (show)

Brand: Friulsider Model and Size: 70mm x 10mm- Free Delivery
Delivery Time: 1 - 2 days
70mm Isofast insulation panel fixings are used for fixing rigid and semi - rigid insulation boards to external solid walls. Plug and nail are made from polypropylene, the nylon nail is reinforced with glass fibre. Isofast fixings offer high fixing thicknesses and no thermal bridging. APPLI..
£34.52
£41.42 inc VAT
Brand: Friulsider Model and Size: 50x4.5mm CTP - Free Delivery
Delivery Time: 1 - 2 days
50mm CTP Insulation Panel Fixings for rigid and semi-rigid insulating boards and panels. APPLICATIONWood, Panels & sheets..
Guide Price: £64.76
£77.71 inc VAT
Brand: Friulsider Model and Size: 50x8 FPR - Free Delivery
Delivery Time: 1 - 2 days
50mm Polypropylene Insulation fixings for rigid and semi-rigid insulating boards and panels.APPLICATIONConcreteSolid stoneSolid brick..
£43.55
£52.26 inc VAT
Brand: Friulsider Model and Size: ISO RG Soft
Delivery Time: 3 - 4 days
ISO RG Insulation Washer for Soft Panels is used for fixing soft insulation panels.  ..
Brand: Friulsider Model and Size: ISO RG -61928060000 - Free Delivery
Delivery Time: 1 - 2 days
Polypropylene ISO RG Screw Cover Cap Insulation Washer is used for fixing insulation panels and it has no thermal transmission due to the screw cover cap. Can be used with screws up to 6mm in diameter...
£31.89
£38.27 inc VAT
Brand: Protektor Model and Size: 1m x 50m (50m2)
Delivery Time: 1 - 2 days
Fiberglass reinforcing mesh is coated with acrylic acid copolymer liquid and is therefore water, alkali and age resistant. The mesh has high tensile strength, good dimensional stability, good elasticity, capillary action and corrosion resistance.CHARACTERISTICSExcellent stability, strength and cohes..
£39.80
£47.76 inc VAT
Brand: Klimas W-M Model and Size: 70mm
Delivery Time: 1 - 2 days
70mm Universal Insulation Panel Fixing with Metal Pin LMX10 is for fixing 10mm thick polystyrene, mineral wool and lamella mineral wool external insulation on concrete, brick, light and autoclave concrete substrates. If the substrate surface is absolutely flat, you may use this anchor to fix in..
£38.00
£45.60 inc VAT
Brand: Klimas W-M Model and Size: 60mm - Free Delivery
Delivery Time: 1 - 2 days
TD060 Nylon Support Disc for Polystyrene, Mineral Wool and Lamella Mineral Wool external wall insulation, to be mounted with a galvanized steel screw. The disc has a stopper, which is used to plug the hole, covering the screw and preventing thermal bridging.CHARACTERISTICSImpact resistant nylon disk..
£25.15
£30.18 inc VAT
Brand: Klimas W-M Model and Size: 90mm
Delivery Time: 1 - 2 days
TDX90 Support Disc is a high impact resistant polyethylene 90mm diameter disc for fixing mineral wool and lamella mineral wool external wall insulation. The greater hold-down area of the disk prevents the anchor pulling through the strands of mineral wool and lamella boards. TDX90 is ..
£12.00
£14.40 inc VAT
140mm x 8mm MLN Fire Rated Metal Fixings for Rainscreen Insulation in Ventilated Cladding Systems - pack of 50
Guide Price
Brand: Klimas W-M Model and Size: 140mm x 8mm - 50 nos
Delivery Time: 5 - 7 days
140mm x 8mm Fire Rated MLN Metal Fixings for Rainscreen Insulation in Ventilated Cladding Systems for fixing mineral wool on concrete, aerated concrete, solid clay bricks and solid silicate bricks. Can be used with 80mm thick mineral wool insulation. Anchoring depth 50mm on hard substrate. Fire..
Brand: Klimas W-M Model and Size: 50mm-
Delivery Time: 1 - 2 days
50mm Screwed-in Helical Fastener WK-DS is for fixing lightweight non-structural components (max. 5 kg/piece) on polystyrene insulation, for example, fixing elements such as signboards, building numbers, mailboxes, lighting fixtures, motion sensors, etc. They are made from high-quality polyamide and ..
£6.50
£7.80 inc VAT
Showing 1 to 11 of 11 (1 Pages)