150x150mm JCW Fire and Acoustic Downlighter Cover
Guide Price
150x150mm JCW Fire and Acoustic Downlighter Cover
Guide Price: £16.54 (£19.85 inc VAT)
- Product Code: A1-1989
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model: 150x150mm
Our ratings on 12-06-2026:
4.8 out of 5
150x150mm JCW Fire and Acoustic Downlighter Cover
Ceiling cutout size: 50mm - 75mm
150x150mm Fire and Acoustic Downlighter Cover is designed to help maintain the fire resistance and acoustic integrity of ceilings. It is ventilated to reduce heat build up.
- Practical: The downlighter covers allow light fittings to operate without overheating.
- Resistant: the fire rating integrity of the ceiling (30-60 minutes of fire rating) is maintained.

- Grasp legs firmly and roll cover into a tight cylinder.
- Ensure wiring loom is through slot before installation.
- Keeping a tight grip on the legs, feed the cover through the cutout made for the downlighter.
- Ensure cover has sprung back into its original cone shape.
- Grasp legs and pull down until L section clears the underside of the ceiling.
- Move legs out until vertical part of L section is flush with the side of the cutout.
- Release legs so that they grip the underside of the tile.
- Remove the excess of both legs.
- Cut at point A Once cover is in place, downlighter can be fitted as normal.
- Please note that remote gearboxes and transformers must be situated outside of the downlighter cover.
JCW Acoustic Downlighter Covers and Cages pass British Standards tests on all types of ceilings, meeting Document B and E (acoustic requirements) of UK Buildings Regulations.
Brand: JCW
Model: 50mm
Delivery Time: 2 - 3 working days
50mm JCW Acoustic Isolation Strip is used for preventing sound transfer by isolating partitioning or party walls from ceiling and floorboards and also from joists that the floor is attached to. It can be used in all forms of construction where there is any point of contact. The strip is manufactured..
£13.50
£16.20 inc VAT
Brand: JCW
Model: 1200x1200mm - 1.44m2
Delivery Time: 2 - 3 working days
32.5mm JCW Silent Board Plus is an enhanced acoustic wall liner manufactured by laminating a 20mm acoustic resilient layer to a 12.5mm layer of acoustic grade plasterboard to drastically reduce sound transmission. It can be applied to either masonry or stud walls and is also suitable to reduce flank..
Guide Price: £75.85
£91.02 inc VAT
Brand: JCW
Model: Single x 47mm deep
Delivery Time: 2 - 3 working days
Single x 47mm deep JCW Fire and Acoustic Socket Box Insert is an acoustic insulation system for wall sockets to eliminate the transfer of sound through walls. Suitable for both new installations and refurbishments, available for both single, double and twin-gang applications. Fabricated from Class O..
Guide Price: £4.57
£5.48 inc VAT
Brand: JCW
Model: 1200x600mm - 0.72m2
Delivery Time: 2 - 3 working days
18mm JCW Acoustic Cement Particle Board is a high density T&G overlay acoustic board suitable for floors and ceilings, specially designed to add concentrated mass. Used where there is a requirement for a high performance result in acoustic control and fire retardance. Manufactured from Portland Ceme..
Guide Price: £38.41
£46.09 inc VAT
Brand: JCW
Model: 100mm
Delivery Time: 1-3 working days
100mm JCW Acoustic Isolation Strip is used for preventing sound transfer by isolating partitioning or party walls from ceiling and floorboards and also from joists that the floor is attached to. It can be used in all forms of construction where there is any point of contact. The strip is manufacture..
£24.97
£29.96 inc VAT
Brand: JCW
Model: 1.05x20m - 15m2
Delivery Time: 2 - 3 working days
3mm JCW Impacta 4551 Mat is an impact sound bonded surface layer for concrete floors made from recycled rubber bonded with cork granulate. It is suitable beneath most floor finishes e.g. laminate, carpet, vinyls and ceramic tiles. Impacta Mat 3mm provides a good Impact Reduction for refurbishment pr..
Guide Price: £114.40
£137.28 inc VAT