250x250mm JCW Fire and Acoustic Downlighter Cover
Guide Price
250x250mm JCW Fire and Acoustic Downlighter Cover
Guide Price: £33.60 (£40.32 inc VAT)
- Product Code: A1-1991
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model: 250x250mm
Our ratings on 22-05-2026:
4.8 out of 5
250x250mm JCW Fire and Acoustic Downlighter Cover
250x250mm Fire and Acoustic Downlighter Cover is designed to help maintain the fire resistance and acoustic integrity of ceilings. It is ventilated to reduce heat build up.
- Practical: The downlighter covers allow light fittings to operate without overheating.
- Resistant: the fire rating integrity of the ceiling (30-60 minutes of fire rating) is maintained.

- Grasp legs firmly and roll cover into a tight cylinder.
- Ensure wiring loom is through slot before installation.
- Keeping a tight grip on the legs, feed the cover through the cut out made for the downlighter.
- Ensure cover has sprung back into its original cone shape.
- Grasp legs and pull down until L section clears the underside of the ceiling.
- Move legs out until vertical part of L section is flush with the side of the cut out.
- Release legs so that they grip the underside of the tile.
- Remove the excess of both legs.
- Cut at point A Once cover is in place, downlighter can be fitted as normal.
- Please note that remote gearboxes and transformers must be situated outside of the downlighter cover.
JCW Acoustic Downlighter Covers and Cages pass British Standards tests on all types of ceilings, meeting Document B and E (acoustic requirements) of UK Buildings Regulations.
Brand: JCW
Model: 1200mm x 1200mm - 1.44m2
Delivery Time: 2 - 3 working days
24.5mm JCW Silent Board is an acoustic wall liner manufactured by laminating a 12mm acoustic resilient layer to a 12.5mm layer of acoustic grade plasterboard to drastically reduce sound transmission. It can be applied to either masonry or stud walls and is also suitable to reduce flanking noise up a..
Guide Price: £49.94
£59.93 inc VAT
Brand: JCW
Model: 1200mm x 1200mm - 1.44m2
Delivery Time: 2 - 3 working days
27.5mm JCW Silent Board is an acoustic wall liner manufactured by laminating a 15mm acoustic resilient layer to a 12.5mm layer of acoustic grade plasterboard to drastically reduce sound transmission. It can be applied to either masonry or stud walls and is also suitable to reduce flan..
Guide Price: £58.17
£69.80 inc VAT
Brand: JCW
Model: 80x42x1800mm
Delivery Time: 5 - 7 days
JCW Acoustic Batten 80C is a 10mm pre bonded open cell, recycled polyurethane resilient layer to a 70mm timber batten for use on concrete subfloors. The JCW Acoustic Batten 80C offers an exceptional reduction in impact sound, whilst maintaining a high compression strength. They can be overlaid with ..
Guide Price: £6.08
£7.30 inc VAT
Brand: JCW
Model: 1200mm x 5000mm - 6.00m2
Delivery Time: 2 - 3 working days
1.2mm JCW Acoustic Barrier Mat is an acoustic barrier matting that offers very good airborne performance across the frequency range. It is a very versatile and dense product that is used for a wide range of applications where airborne sound reduction is required. The most common installation areas a..
Guide Price: £50.09
£60.11 inc VAT
Brand: JCW
Model: 1200x600mm - 0.72m2
Delivery Time: 3 - 5 weeks
22mm JCW Acoustic Cement Particle Board is a high density T&G overlay acoustic board suitable for floors and ceilings, specially designed to add concentrated mass. Used where there is a requirement for a high performance result in acoustic control and fire retardance. Manufactured from Portland Ceme..
Guide Price: £45.36
£54.43 inc VAT
Brand: JCW
Model: 5mm x 150mm - Free Delivery
Delivery Time: 2 - 3 working days
5mm JCW Perimeter Edging Strip is a foam strip to isolate acoustic flooring from perimeter walls and maintain the acoustic integrity of the structure. For use with Acoustic Battens, Acoustic Cradles and Acoustic Decks.APPLICATIONTo isolate acoustic flooring from perimeter walls CERTIFICATIONIt has b..
Guide Price: £18.10
£21.72 inc VAT