350x230mm JCW Fire and Acoustic Downlighter Cover
Guide Price
350x230mm JCW Fire and Acoustic Downlighter Cover
Guide Price: £65.63 (£78.76 inc VAT)
- Product Code: A1-1993
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model and Size: 350x230mm
Our ratings on 29-04-2025:
4.7 out of 5 - Excellent
4.8 out of 5
350x230mm JCW Fire and Acoustic Downlighter Cover
350x230mm Fire and Acoustic Downlighter Cover is designed to help maintain the fire resistance and acoustic integrity of ceilings. It is ventilated to reduce heat build up.
- Practical: The downlighter covers allow light fittings to operate without overheating.
- Resistant: the fire rating integrity of the ceiling (30-60 minutes of fire rating) is maintained.
- Flatten the cover.
- Fold the cover into quarters by folding it in half once, and then folding it in half again.
- Pass the folded cover through the aperture.
- Then fit the downlighter cover as per the downlighter manufacturers instructions - cables may be pushed through the vent slots in the cover.
- Check and ensure that there is a minimum of 20mm clearance between the downlighter and any insulation or acoustic filling in the void.
- Cut any excess.
- Please note that remote gearboxes and transformers must be situated outside of the downlighter cover.
JCW Acoustic Downlighter Covers and Cages pass British Standards tests on all types of ceilings, meeting Document B and E (acoustic equirements) of UK Buildings Regulations.
JCW Downlighter-Covers.pdf
Guide Price
Brand: JCW
Model and Size: 600x1200mm
Delivery Time: 2 - 3 working days
20mm JCW Fire Rated Luminaire Cover that provides maximum protection for ceilings where fire resistant ceiling tiles have been replaced with light fittings. The cover has been designed for ease of fitting. It is self locating and cannot be fitted incorrectly. It incorporates ventilation slots t..
Guide Price: £106.72
£128.06 inc VAT
Guide Price
Brand: JCW
Model and Size: 50x42x1800mm
Delivery Time: 2 - 3 working days
JCW Acoustic Batten 50C is a 10mm pre bonded open cell, recycled polyurethane resilient layer to a 40mm timber batten for use on concrete subfloors. The JCW Acoustic Batten 50C offers an exceptional reduction in impact sound, whilst maintaining a high compression strength. They can be overlaid with ..
Guide Price: £5.67
£6.80 inc VAT
Guide Price
Brand: JCW
Model and Size: JCW Acoustic Sealant
Delivery Time: 2 - 3 working days
JCW Acoustic Sealant is a high strength, permanently flexible white acoustic sealant and adhesive specifically formulated for sealing and bonding plasterboard. It is ideal for sealing the edges of plasterboard systems and filling and sealing any holes where services have been installed, thereby..
Guide Price: £4.50
£5.40 inc VAT
Guide Price
Brand: JCW
Model and Size: 1.05x20m - 21.00m2
Delivery Time: 2 - 3 working days
3mm JCW Impacta 4551 Mat is an impact sound bonded surface layer for concrete floors made from recycled rubber bonded with cork granulate. It is suitable beneath most floor finishes e.g. laminate, carpet, vinyls and ceramic tiles. Impacta Mat 3mm provides a good Impact Reduction for refurbishment pr..
Guide Price: £177.59
£213.11 inc VAT
Guide Price
Brand: JCW
Model and Size: 1200mm x 1200mm - 1.44m2
Delivery Time: 2 - 3 working days
16.5mm JCW Noiseboard 10 is an acoustic wall liner manufactured by laminating a 4mm acoustic resilient layer to a 12.5mm layer of acoustic grade plasterboard to drastically reduce sound transmission. It is a high-performance acoustic overlay improvement board, specifically designed for both new..
Guide Price: £42.73
£51.28 inc VAT
Brand: JCW
Model and Size: 100mm - Free Delivery
Delivery Time: 3 - 5 days
100mm JCW Acoustic Isolating Strip is used for preventing sound transfer by isolating partitioning or party walls from ceiling and floorboards and also from joists that the floor is attached to. It can be used in all forms of construction where there is any point of contact. The strip is manufacture..