250x250mm JCW Fire and Acoustic Downlighter Cover

Guide Price
250x250mm JCW Fire and Acoustic Downlighter Cover
Guide Price: £30.97 (£37.16 inc VAT)
- Product Code: A1-1991
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model and Size: 250x250mm
Our ratings on 13-08-2025:

4.8 out of 5
250x250mm JCW Fire and Acoustic Downlighter Cover
250x250mm Fire and Acoustic Downlighter Cover is designed to help maintain the fire resistance and acoustic integrity of ceilings. It is ventilated to reduce heat build up.
- Practical: The downlighter covers allow light fittings to operate without overheating.
- Resistant: the fire rating integrity of the ceiling (30-60 minutes of fire rating) is maintained.

- Grasp legs firmly and roll cover into a tight cylinder.
- Ensure wiring loom is through slot before installation.
- Keeping a tight grip on the legs, feed the cover through the cut out made for the downlighter.
- Ensure cover has sprung back into its original cone shape.
- Grasp legs and pull down until L section clears the underside of the ceiling.
- Move legs out until vertical part of L section is flush with the side of the cut out.
- Release legs so that they grip the underside of the tile.
- Remove the excess of both legs.
- Cut at point A Once cover is in place, downlighter can be fitted as normal.
- Please note that remote gearboxes and transformers must be situated outside of the downlighter cover.
JCW Acoustic Downlighter Covers and Cages pass British Standards tests on all types of ceilings, meeting Document B and E (acoustic requirements) of UK Buildings Regulations.
Brand: JCW
Model and Size: 1200mm x 5000mm - 6.00m2
Delivery Time: 2 - 3 working days
1.2mm JCW Acoustic Barrier Mat is an acoustic barrier matting that offers very good airborne performance across the frequency range. It is a very versatile and dense product that is used for a wide range of applications where airborne sound reduction is required. The most common installation areas a..
Guide Price: £51.77
£62.12 inc VAT
Brand: JCW
Model and Size: 80x42x1800mm
Delivery Time: 5 - 7 days
JCW Acoustic Batten 80C is a 10mm pre bonded open cell, recycled polyurethane resilient layer to a 70mm timber batten for use on concrete subfloors. The JCW Acoustic Batten 80C offers an exceptional reduction in impact sound, whilst maintaining a high compression strength. They can be overlaid with ..
Guide Price: £5.99
£7.19 inc VAT
Brand: JCW
Model and Size: 600x600mm
Delivery Time: 2 - 3 working days
20mm JCW Fire Rated Luminaire Cover that provides maximum protection for ceilings where fire resistant ceiling tiles have been replaced with light fittings. The cover has been designed for ease of fitting. It is self locating and cannot be fitted incorrectly. It incorporates ventilation slots t..
Guide Price: £80.84
£97.01 inc VAT
Brand: JCW
Model and Size: 300mm - free delivery
Delivery Time: 3 - 5 days
300mm JCW Acoustic Isolating Strip is used for preventing sound transfer by isolating partitioning or party walls from ceiling and floorboards and also from joists that the floor is attached to. It can be used in all forms of construction where there is any point of contact. The strip is manufacture..
Brand: JCW
Model and Size: 1200mm x 1200mm - 1.44m2
Delivery Time: 2 - 3 working days
24.5mm JCW Silent Board is an acoustic wall liner manufactured by laminating a 12mm acoustic resilient layer to a 12.5mm layer of acoustic grade plasterboard to drastically reduce sound transmission. It can be applied to either masonry or stud walls and is also suitable to reduce flanking noise up a..
Guide Price: £49.17
£59.00 inc VAT
Brand: JCW
Model and Size: 1.05x20m - 21.00m2
Delivery Time: 2 - 3 working days
3mm JCW Impacta 4551 Mat is an impact sound bonded surface layer for concrete floors made from recycled rubber bonded with cork granulate. It is suitable beneath most floor finishes e.g. laminate, carpet, vinyls and ceramic tiles. Impacta Mat 3mm provides a good Impact Reduction for refurbishment pr..
Guide Price: £177.59
£213.11 inc VAT