Search - expansion profile
Search results
Search results
Filter by MANUFACTURER
Guide Price
Brand: Wemico
Model and Size: WEC 771
Delivery Time: 1 - 2 days
120mm WEC 771 Verge Trim Profile is designed for use in situations where sealing the rear of the profile is possible. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soaking the insulation.Manufactured ..
Guide Price: £24.82
£29.78 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 781 - 120mm
Delivery Time: 1 - 2 days
The WEC 781 Grind in Verge Trim Profile is designed for use in situations where there are problems sealing the rear of the profile. It is also a cost effective way to seal the system instead of increasing the roof line. This profile also has an increased drip section to improve visual appearance and..
Guide Price: £32.06
£38.47 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 791 - 120mm
Delivery Time: 1 - 2 days
The WEC 791 profile has an up-stand that can be pushed under a barge board. This reduces the need for a mastic seal and removes future maintenance issues. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soak..
Guide Price: £31.34
£37.61 inc VAT
Guide Price
Brand: Wemico
Model and Size: Verge Trim End Cap - 120mm
Delivery Time: 1 - 2 days
120mm WEC End Cap for Verge Trim Profiles can be used with; WEC 771, WEC 781, WEC 791 AND IGT range of profiles. Manufactured in 1.2mm pre-coated white aluminium...
Guide Price: £5.72
£6.86 inc VAT
Guide Price
Brand: Wemico
Model and Size: 37824
Delivery Time: 2 - 3 working days
12mm Wemico PVC Shadow Gap Profile is used to create a neat shadow gap finish at the edge of plasterboard for a contemporary interior design effect, for example, around door frames or where a plastered wall meets a ceiling or finished floor. Shadow gaps can provide the perfect finishing touch, but b..
Guide Price: £65.03
£78.04 inc VAT
Guide Price
Brand: Wemico
Model and Size: BrickSlip130
Delivery Time: 1 - 2 days
130mm Wemico aluminium brickslip profile for use in Insulation systems finished with a brick slip detail. These profiles can be powder coated to any standard RAL colour...
Guide Price: £21.89
£26.27 inc VAT
Guide Price
Brand: Wemico
Model and Size: 95513
Delivery Time: 1 - 2 days
130mm Aluminium System Starter Track Profile for Curved Walls for 120mm insulation. Slit the back fixing leg and then bend profile around the curve of the wall. ..
Guide Price: £23.92
£28.70 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 732 - 130mm
Delivery Time: 1 - 2 days
The WEC 732 profile has an increased drip section to improve visual appearance and a large front face to help prevent water blowing up and soaking the insulation. The new design of drip also allows the end caps to be riveted into position. Manufactured from 1.2mm pre-coated white aluminium, in lengt..
Guide Price: £36.04
£43.25 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 771OT
Delivery Time: 1 - 2 days
130mm WEC 771 Verge OverTrim Profile is designed for use in situations where sealing the rear of the profile is possible. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soaking the insulation.Manufactured i..
Guide Price: £24.82
£29.78 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 771
Delivery Time: 1 - 2 days
130mm WEC 771 Verge Trim Profile is designed for use in situations where sealing the rear of the profile is possible. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soaking the insulation.Manufactured ..
Guide Price: £24.82
£29.78 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 781 - 130mm
Delivery Time: 1 - 2 days
The WEC 781 Grind in Verge Trim Profile is designed for use in situations where there are problems sealing the rear of the profile. It is also a cost effective way to seal the system instead of increasing the roof line. This profile also has an increased drip section to improve visual appearance and..
Guide Price: £32.06
£38.47 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 791 - 130mm
Delivery Time: 1 - 2 days
The WEC 791 profile has an up-stand that can be pushed under a barge board. This reduces the need for a mastic seal and removes future maintenance issues. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soak..
Guide Price: £31.34
£37.61 inc VAT
Guide Price
Brand: Wemico
Model and Size: Verge Trim End Cap - 130mm
Delivery Time: 1 - 2 days
130mm WEC End Cap for Verge Trim Profiles can be used with; WEC 771, WEC 781, WEC 791 AND IGT range of profiles. Manufactured in 1.2mm pre-coated white aluminium...
Guide Price: £5.72
£6.86 inc VAT
Guide Price
Brand: Wemico
Model and Size: 37724
Delivery Time: 2 - 3 working days
13mm PVC Architrave Profile is a fixture that accentuate doors and arches. Architraves are fitted over arches and doorways in your home to add a distinctive touch of decoration to your walls. Architraves are excellence for adding a sense of decorum to the appearance of your interior to provide textu..
Guide Price: £179.94
£215.93 inc VAT
Brand: Wemico
Model and Size: 3727
Delivery Time: 2 - 3 working days
13mm self adhesive PVC profile a self adhesive PVC profile for use on window reveals or door frames. This profile can be attached to the frame with a foam tape, the frameseal has an adhesive strip to enable use of a protective film to be applied during the rendering process, which is pulled off..
Guide Price
Brand: Wemico
Model and Size: BrickSlip140
Delivery Time: 1 - 2 days
140mm Wemico aluminium brickslip profile for use in Insulation systems finished with a brick slip detail. These profiles can be powder coated to any standard RAL colour...
Guide Price: £22.10
£26.52 inc VAT
Guide Price
Brand: Wemico
Model and Size: 95514
Delivery Time: 1 - 2 days
140mm Aluminium System Starter Track Profile for Curved Walls for 120mm insulation. Slit the back fixing leg and then bend profile around the curve of the wall. ..
Guide Price: £25.94
£31.13 inc VAT
Brand: James Hardie
Model and Size: 90mm x 3655mm x 25mm
Delivery Time: 3 - 7 days
Hardie Trim NT3 - Fibre Cement Profile - 140mm x 3655mm x 25mm is high quality low maintenance fibre cement trim profile that brings definition and depth to the lines and edges of the façade, tough enough to withstand the elements.Available Colours: Arctic White, Midnight Black & Sail Clot..
Guide Price
Brand: Wemico
Model and Size: WEC 732
Delivery Time: 1 - 2 days
The WEC 732 profile has an increased drip section to improve visual appearance and a large front face to help prevent water blowing up and soaking the insulation. The new design of drip also allows the end caps to be riveted into position. Manufactured from 1.2mm pre-coated white aluminium, in lengt..
Guide Price: £36.04
£43.25 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 771OT - 140mm
Delivery Time: 1 - 2 days
140mm WEC 771 Verge OverTrim Profile is designed for use in situations where sealing the rear of the profile is possible. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soaking the insulation.Manufactu..
Guide Price: £29.89
£35.87 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 771 - 140mm
Delivery Time: 1 - 2 days
140mm WEC 771 Verge Trim Profile is designed for use in situations where sealing the rear of the profile is possible. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soaking the insulation.Manufactured ..
Guide Price: £29.89
£35.87 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 781 - 140mm
Delivery Time: 1 - 2 days
The WEC 781 Grind in Verge Trim Profile is designed for use in situations where there are problems sealing the rear of the profile. It is also a cost effective way to seal the system instead of increasing the roof line. This profile also has an increased drip section to improve visual appearance and..
Guide Price: £32.06
£38.47 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 791 - 140mm
Delivery Time: 1 - 2 days
The WEC 791 profile has an up-stand that can be pushed under a barge board. This reduces the need for a mastic seal and removes future maintenance issues. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soak..
Guide Price: £36.53
£43.84 inc VAT
Guide Price
Brand: Wemico
Model and Size: Verge Trim End Cap - 140mm
Delivery Time: 1 - 2 days
140mm WEC End Cap for Verge Trim Profiles can be used with; WEC 771, WEC 781, WEC 791 AND IGT range of profiles. Manufactured in 1.2mm pre-coated white aluminium...
Guide Price: £5.72
£6.86 inc VAT
Guide Price
Brand: Wemico
Model and Size: 37526
Delivery Time: 1 - 2 days
14mm PVC Corner profile with an extended arris and 100x150mm alkali resistant glass fibre mesh wings, which allows it to be cut to the required length and reduces waste. 2.5m length...
Guide Price: £149.58
£179.50 inc VAT
Brand: Wemico
Model and Size: 37502
Delivery Time: 1 - 2 days
14mm PVC base profile for use between DPC and insulation systems. Available in a range of widths and render thicknesses. Can also be used in conjunction with a PVC angle section as a 2 part base starter track. Please contact us for details...
£282.42
£338.90 inc VAT
Guide Price
Brand: Wemico
Model and Size: BrickSlip150
Delivery Time: 1 - 2 days
150mm Wemico aluminium brickslip profile for use in Insulation systems finished with a brick slip detail. These profiles can be powder coated to any standard RAL colour...
Guide Price: £27.46
£32.95 inc VAT
Guide Price
Brand: Wemico
Model and Size: 95515
Delivery Time: 1 - 2 days
150mm Aluminium System Starter Track Profile for Curved Walls for 120mm insulation. Slit the back fixing leg and then bend profile around the curve of the wall. ..
Guide Price: £28.50
£34.20 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 732 - 150mm
Delivery Time: 1 - 2 days
The WEC 732 profile has an increased drip section to improve visual appearance and a large front face to help prevent water blowing up and soaking the insulation. The new design of drip also allows the end caps to be riveted into position. Manufactured from 1.2mm pre-coated white aluminium, in lengt..
Guide Price: £36.04
£43.25 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 771OT - 150mm
Delivery Time: 1 - 2 days
150mm WEC 771 Verge OverTrim Profile is designed for use in situations where sealing the rear of the profile is possible. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soaking the insulation.Manufactured i..
Guide Price: £29.89
£35.87 inc VAT