33mm Isocheck Isowave Cavity Barrier 33 - Underfloor and Above Ceiling Insulation
33mm Isocheck Isowave Cavity Barrier 33 - Underfloor and Above Ceiling Insulation
- Product Code: A1-3126
- Delivery Time: 3 - 5 days
- Brand: Isomass (Tech. support: 08458383389)
- Model and Size: 1200mm x 600mm - 0.72m2
- Weight: 12.46kg
Our ratings on 12-09-2025:
4.8 out of 5
33mm Isocheck Isowave Cavity Barrier 33 - Underfloor and Above Ceiling Insulation
Width: 600mm
Length: 1200mm
Board Coverage: 0.72m2
Density: 1300kg/m3
Weight/m2: 17.3kg
Weight: 12.46kg
Isocheck Isowave Cavity Barrier 33 is an acoustic plasterboard used for reducing excessive flanking sound transmission through underfloor and above ceiling cavities, the voids beneath and above the partition. Isocheck Acoustic Cavity Barrier consists of a single or double layer of 10mm semi-rigid acoustic foam bonded to 12.5mm high density, square edged fibre-reinforced gypsum board. Isocheck Isowave Acoustic Cavity Barrier is suitable to be used in all types of ceiling and floor void spaces including raised access flooring and suspended ceilings.
CHARACTERISTICS
- Provides flanking and airborne sound transmission reduction,
- Applicable to new build, refurbishment and conversation,
- Includes an acoustic foam measured to BS 4443 and BS EN ISO 845:2009,
- Provides good thermal properties,
- Able to meet values prescribed by the Approved Document E of the Building Regulations for ozone depletion,
- Environmentally friendly,
- Great sound damping characteristics,
- Improves privacy.
APPLICATION
Isocheck Isowave Cavity Barrier 33 is applicable in refurbishment, conversion and new build applications, where there is void above the ceiling or under the floor.
INSTALLATION
- Cut to shape using a hand saw or a circular saw,
- Fix Acoustic Cavity Barrier to timber battens or angle brackets,
- Ensure all gaps are sealed using Isocheck Acoustic FR Sealant or equal.
CERTIFICATION
The product is in compliance with:
- Approved Document E of the Building Regulations,
- Acoustic foam core is measured to BS 4443 and BS EN ISO 845:2009,
- EU Regulation No 2037/2000 for ozone depletion.
Isocheck_Acoustic_Cavity_Barrier_33.pdf
Guide Price
Brand: Isomass
Model and Size: 1x15m - 15m2
Delivery Time: 3 - 5 days
Isocheck Re-Mat Base 5 Acoustic Screed Underlay is an impact improvement under screed system, designed for reducing sound transmission and improving acoustic performance of concrete block and beam floors. The system is used in new build, refurbishment and conversion applications, able to meet t..
Guide Price: £212.00
£254.40 inc VAT
Brand: Isomass
Model and Size: 310ml
Delivery Time: 1 - 2 days
310ml Isomass Isocheck Intumescent Acoustic FR Sealant is a sealing and fire stopping product intended for penetration services and linear joint and gap seals. Isocheck acoustic fire rated sealant is used to reduce the unwanted airborne sound that is commonly found to pass around the junct..
Brand: Isomass
Model and Size: 35mm - 10.5mm
Delivery Time: 2 - 3 working days
35mm Isocheck Isolation Washers are used to isolate and separate mechanical fixings from the surrounding structure and reduce the transfer of noise and vibration.Diameter A = 35mmDiameter screw B = 10.5mm..
Brand: Isomass
Model and Size: 8/16 - 10mm - 4m Free Delivery
Delivery Time: 1 - 2 days
10mm Isocheck Expandastrip 8/16 is a permanently elastic open cell Polyurethane foam, used as a seal in joints between pre-cast units, sealing around doors and window frames, or between corrugated roofing panels, roof structures and roof lights ventilation and air conditioning ductwork. It is impreg..
Brand: Isomass
Model and Size: 120x1250mm
Delivery Time: 3 - 5 days
120mm Isocheck Re-Mat Acoustic Isolation Strips are used to reduce structure borne noise when installed beneath block work walls, separating concrete floors from the walls. The strips are made from a rubber crumb, providing minimal creep and great structural stability. The strips are available in di..
Brand: Isomass
Model and Size: 1200mm x 900mm - 1.08m2
Delivery Time: 1 - 2 days
40mm Isocheck Absorba Ceiling and Wall Panels are designed to absorb sound and reduce reverberation noise. The tiles comprise a fibreglass core with a white speckled laminated coating. They also have reinforced bevel edges contributing to allowing unique wall and ceiling designs. They can be emulsio..