85mm Kingspan Kooltherm K110 Soffit Insulation Board (pack of 3)

85mm Kingspan Kooltherm K110 Soffit Board is a premium performance lower lambda insulation with a fibre-free rigid thermoset phenolic core, a 6mm glass tissue based facing on its front surface and low emissivity composite foil on its reverse surface. Manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP).

• Safe and easy to handle and install,
  
• Water vapour resistant,
  
• Fire rated - Euroclass: C-s2,d0,
  
• Non-deleterious,
  
• Very durable, depending on the structure and conditions of use,
  
• Unaffected by air filtration,
  
• High performance thermoset rigid insulation,
  
• Applicable in both new build and refurbishment projects,
  
• Environmentally friendly, with 0 ODP and low GWP.
  

• concrete soffits;
  
• timber battens and
  
• proprietary grid systems.

    

• Insulation boards should be installed with joints lightly butted.
• The number of mechanical fixings required will vary with the geographical location of the building, the local topography, the height and width of the soffit concerned, and the soffit construction.
• A minimum of 11 mechanical fixings, with a minimum head diameter of 35 mm, are required to secure the insulation board to the soffit.
• Where the insulation boards may be subject to external wind pressure, the requirement for additional fixings should be assessed in accordance with BS/I.S. EN 199114: 2005 (National Annex to Eurocode 1 Actions on Structures. General Actions. Wind Actions).
• The fixings should be evenly distributed over the whole area of the board, and must offer a minimum 40 mm penetration into a solid substrate.
• Fixings at board edges must be located > 50 mm and < 150 mm from edges and corners of the board and not overlap board joints.
• Depending upon the fixing type, insulation boards can also be fitted by a shot fired fixing method, which can result in significantly faster installation times. 
  

• ISO 9001: 2015 (Quality Management Systems. Requirements),
• ISO 14001: 2015 (Environmental Management Systems. Requirements),
• BS/I.S. OHSAS 18001: 2007 (Occupational Health & Safety Management Systems. Requirements)
• ISO 50001: 2011 (Energy Management Systems. Requirements with guidance for use).