Ceresit CT16 Primer - 10 litres
sale!
Ceresit CT16 Primer - 10 litres
Price: £37.50 (£45.00 inc VAT)
£35.63 (£42.76 inc VAT)
Price per m2: £1.27/m2 (£1.53 inc VAT)
10 or more £33.25 (£39.90 inc VAT)
15 or more £30.88 (£37.06 inc VAT)
20 or more £29.45 (£35.34 inc VAT)
- Product Code: A1-633
- Delivery Time: In Stock 1-2 working days
- Brand: Ceresit
- Model and Size: 10L
- Weight: 10.00kg
Our ratings on 26-04-2024:
4.6 out of 5 - Excellent
4.8 out of 5
Ceresit CT16 Primer - 10 litres
Ceresit CT16 is designed for priming substrates before the application of mineral, acrylic, silicone and silicone-silicate thin-coat renders, finishes and paint coats. Facilitates the application and texturing of plasters, optimize the drying process and improves the plaster-to-substrate adhesion. Provides a uniform substrate, prevents stain build-up on thin-coat and coloured plasters. Designed for brush application on mesh-reinforced layers when insulating walls with Ceresit Ceretherm Systems and on traditional indoor/outdoor plasters.
- Manufactured in more than two hundred colours
- Easier application of render
- Waterproof
- High adhesion to the substrate
- Ready to use
- Indoor and outdoor use
- Insulated renders
- External wall insulation systems
Application and installation of an external wall insulation system
Ceresit EPS and Mineral Wool External Wall Insulation Systems are BBA approved systems.
Once purchased this product is non-returnable.
Please note that we can supply this product cheaper if you buy it with the whole external wall system from us. Contact us for more details.
Ceresit_CT16_Safety_Datasheet.PDF
Brand: Ceresit
Model and Size: CT87
Delivery Time: In Stock 1-2 working days
Ceresit CT87 mortar is designed to insulate external walls of the buildings by application of external thermal insulation composite system using EPS- or mineral wool facade boards. It is an element of following ETICS from Ceresit Ceretherm Premium, Express and Wool Premium. CT 87 mortar is used for ..
£27.20
£32.64 inc VAT
Brand: Ceresit
Model and Size: CT74
Delivery Time: 7 - 10 days
2mm grain Ceresit CT74 is used for making thin-layer plasters on concrete substrates, traditional plasters, gypsum substrates and chipboards, gypsum cardboards, etc. We recommend the application of the plaster CT 74 as façade plaster within Ceresit ETICS (External Thermal Insulation Composite System..
Guide Price: £65.55
£78.66 inc VAT
sale!
Brand: Ceresit
Model and Size: Pallet of 48 bags
Delivery Time: 1 - 2 days
Ceresit ZU is designed to insulate external walls of the buildings by application of external thermal insulation composite system using polystyrene boards. It is a component of following ETICS from Ceresit Ceretherm Premium, Express and Wool Premium. Ceresit ZU is used for fixing of EPS boards and ..
£592.80
£711.36 inc VAT
sale!
Brand: Ceresit
Model and Size: CT240
Delivery Time: 2 - 4 days
Ceresit CT 240 Winter is a high quality accelerating additive for wet renders and paints drying under low temperatures in late autumn and early spring times, especially when the temperature fall below zero in the nights. This additive can be used for thin-coat acrylic renders - CT 60, CT 63, CT 64, ..
£11.40
£13.68 inc VAT
sale!
Brand: Ceresit
Model and Size: CR65
Delivery Time: 2 - 3 working days
Ceresit CR65 is a high water impermeable tanking slurry, which permits diffusion, but is frost resistant, and suitable for drinking water tanks. Used on the horizontal and vertical surfaces of buildings, structural components and tanks, for waterproofing against water loads, for waterproofing m..
£28.48
£34.18 inc VAT
sale!
Brand: Ceresit
Model and Size: 10L
Delivery Time: In Stock 1-2 working days
Ceresit CT16 is designed for priming substrates before the application of mineral, acrylic, silicone and silicone-silicate thin-coat renders, finishes and paint coats. Facilitates the application and texturing of plasters, optimize the drying process and improves the plaster-to-substrate adhesion. P..
£35.63
£42.76 inc VAT