Ceresit ZU WHITE Polystyrene and Reinforced Mesh Adhesive - Base Coat Render
sale!
Ceresit ZU WHITE Polystyrene and Reinforced Mesh Adhesive - Base Coat Render
Price: £21.87 (£26.24 inc VAT)
£20.78 (£24.94 inc VAT)
Price per m2: £4.16/m2 (£4.99 inc VAT)
- Product Code: A1-2732
- Delivery Time: 1 - 2 days
- Brand: Ceresit
- Model and Size: ZU White - 25kg
- Weight: 25.00kg
Our ratings on 25-04-2024:
4.6 out of 5 - Excellent
4.8 out of 5
Ceresit ZU White Polystyrene and Reinforced Mesh Adhesive - Base Coat Render
Weight: 25kg
Ceresit ZU White is designed to insulate external walls of the buildings by application of external thermal insulation composite system using polystyrene boards. It is a component of following ETICS from Ceresit Ceretherm Premium. Ceresit ZU White is used for fixing of EPS boards and also for applying the reinforcing protection layer to insulate the newly constructed buildings as well as for thermo-renovation.
CHARACTERISTICS
- Resistant to weather conditions
- Highly elastic
- Flexible
- Durable
- High adhesion
- Machine and manual application
APPLICATIONS
- External wall EPS insulation system
Fixing polystyrene boards.
- Adhesive should be applied with a trowel around the perimeter of the board - band of 3-4cm wide and several blobs in the centre.
- Place the board to the wall and press it down with a long float. Properly applied mortar after pressing the board to the wall should cover min. 40% of its area.
- The boards should be fixed closely to each other in one plane, with the horizontal joints in different levels.
Installing the reinforced mesh.
- Add the adhesive with a 10 or 12 mm notched trowel on the surface polystyrene boards.
- Press the mesh on the fresh mortar until it is no longer visible.
- Thin coat render can be made after approx. 24 hours from the application of the reinforcement layer.
Once purchased this product is non-returnable.
Please note that we can supply this product cheaper if you buy it with the whole external wall system from us. Contact us for more details.
Ceresit EPS External Wall Insulation Systems are BBA approved systems
Ceresit_ZU_Safety_Datasheet.PDF
Guide Price
Brand: Ceresit
Model and Size: CT74 - 25kg
Delivery Time: 5 - 7 days
1.5mm grain Ceresit CT79 Impactum is a tough stone like decorative elastomeric render for indoor and outdoor applications, where high damage and operating resistance is required. This render is specially recommended for applications on partitions where high damage and operating resistance is require..
Guide Price: £84.09
£100.91 inc VAT
sale!
Brand: Ceresit
Model and Size: FG-038
Delivery Time: 2 - 3 working days
The expanding foam gun is a tool which gives a much greater degree of control over the product you are using which not only increases the accuracy of the application but cuts down on un-wanted and unnecessary wastage. Foam gun is manufactured to the highest quality controls and strong construction t..
£19.00
£22.80 inc VAT
Guide Price
Brand: Ceresit
Model and Size: 280ml
Delivery Time: In Stock 1-2 working days
Ceresit CS-38 is a one-component, high-temperature sealant resistant to direct contact with fire and temperature fluctuations up to +1,200 ° C, and for short periods even up to +1,500 ° C. It has very good adhesion to surfaces such as: concrete, cement mortars and plasters, bricks (also refractory),..
sale!
Brand: Ceresit
Model and Size: ZU White - 25kg
Delivery Time: 1 - 2 days
Ceresit ZU White is designed to insulate external walls of the buildings by application of external thermal insulation composite system using polystyrene boards. It is a component of following ETICS from Ceresit Ceretherm Premium. Ceresit ZU White is used for fixing of EPS boards and also for apply..
£20.78
£24.94 inc VAT
Brand: Ceresit
Model and Size: CT72
Delivery Time: 5 - 7 days
1.5mm grain Ceresit CT 72 Silicate Render is used for making thin-layer plasters on concrete substrates, traditional plasters, gypsum substrates and chipboards, gypsum cardboards, etc. We recommend the application of the plaster CT 72 as faade plaster within Ceresit ETICS (External Thermal Insulatio..
Guide Price: £55.10
£66.12 inc VAT
sale!
Brand: Ceresit
Model and Size: 25kg
Delivery Time: 5 - 7 days
Ceresit CT76 Solar Protect is a decorative thin-layer silicon-elastomer stone texture render with increased UV resistance for use on building facades. It is used for thin-layer plastering on thermal insulation systems, concrete substrates, traditional plasters, gypsum substrates and chipboards, gyps..
£85.03
£102.04 inc VAT