Search - WA 0859 3970 0884 Pemesanan Meja Ukuran 137 X 180 Awet Lendah Kulon Progo
Search results
Search results
Brand: Rockwool
Model and Size: 1000mm x 600mm - 1.80m2
Delivery Time: 1 - 2 weeks
180mm Rockwool Ventirock F Super Rainscreen Slab is a dual-density rigid insulation, used where façade safety is important. As it has a higher density, it can be used for walls with increased fire requirements. Thanks to high resistance to water absorption, the problems of wetting during works are m..
Brand: Rockwool
Model and Size: 1000mm x 600mm - 1.80m2
Delivery Time: 1 - 2 weeks
180mm Rockwool Ventirock Super Rainscreen Slab is a dual-density rigid insulation, used where façade safety is important. As it has a higher density, it can be used for walls with increased fire requirements. Thanks to high resistance to water absorption, the problems of wetting during works are min..
Brand: Klimas W-M
Model and Size: 180mm
Delivery Time: In Stock 1-2 working days
180mm Universal Insulation Panel Fixing with Metal Pin LMX10 is for fixing 10mm thick polystyrene, mineral wool and phenolic external insulation on concrete, brick, light and autoclave concrete substrates. The anchor is made of polypropylene and is impact resistant. The expander pin is made of zinc ..
£60.80
£72.96 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 732 - 180mm
Delivery Time: 1 - 2 days
The WEC 732 profile has an increased drip section to improve visual appearance and a large front face to help prevent water blowing up and soaking the insulation. The new design of drip also allows the end caps to be riveted into position. Manufactured from 1.2mm pre-coated white aluminium, in lengt..
Guide Price: £36.04
£43.25 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 771OT - 180mm
Delivery Time: 1 - 2 days
180mm WEC 771 Verge OverTrim Profile is designed for use in situations where sealing the rear of the profile is possible. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soaking the insulation.Manufactured i..
Guide Price: £29.89
£35.87 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 771 - 180mm
Delivery Time: 1 - 2 days
180mm WEC 771 Verge Trim Profile is designed for use in situations where sealing the rear of the profile is possible. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soaking the insulation.Manufactured in 1...
Guide Price: £29.89
£35.87 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 781 - 180mm
Delivery Time: 1 - 2 days
The WEC 781 Grind in Verge Trim Profile is designed for use in situations where there are problems sealing the rear of the profile. It is also a cost effective way to seal the system instead of increasing the roof line. This profile also has an increased drip section to improve visual appearance and..
Guide Price: £40.51
£48.61 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 791 - 180mm
Delivery Time: 1 - 2 days
The WEC 791 profile has an up-stand that can be pushed under a barge board. This reduces the need for a mastic seal and removes future maintenance issues. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soak..
Guide Price: £39.79
£47.75 inc VAT
Guide Price
Brand: Wemico
Model and Size: Verge Trim End Cap - 180mm
Delivery Time: 1 - 2 days
180mm WEC End Cap for Verge Trim Profiles can be used with; WEC 771, WEC 781, WEC 791 AND IGT range of profiles. Manufactured in 1.2mm pre-coated white aluminium...
Guide Price: £5.72
£6.86 inc VAT
Guide Price
Brand: Wemico
Model and Size: 95519
Delivery Time: 1 - 2 days
190mm Aluminium System Starter Track Profile for Curved Walls for 120mm insulation. Slit the back fixing leg and then bend profile around the curve of the wall...
Guide Price: £32.33
£38.80 inc VAT
Guide Price
Brand: Teco
Model and Size: 195mm - Free Delivery
Delivery Time: 1 - 2 days
195mm Helical Flat Roof Fixings for Warm Roofs. A new fixing for securing structural 6 mm plywood composite insulation. 16-20 fixings needed per 1200x2400mm board depending on rafter spacing.APPLICATIONHammer driven fixing for securing structural 6mm plywood composite insulation board to flat roofs ..
Guide Price: £33.07
£39.68 inc VAT
Guide Price
Brand: Wemico
Model and Size: 95520
Delivery Time: 1 - 2 days
200mm Aluminium System Starter Track Profile for Curved Walls for 120mm insulation. Slit the back fixing leg and then bend profile around the curve of the wall...
Guide Price: £32.77
£39.32 inc VAT
Brand: Ancon
Model and Size: 200mm
Delivery Time: 2 - 3 working days
200mm Ancon 63 Mechanical/Mechanical Wall Tie is a masonry remedial wall tie for use for tying together two leaves of solid walls. This MM63 tie has mechanical expanders at each end. Requires 12mm Ø holes. These remedial ties are used on older building, where brickwork had been cracked due..
Brand: Ancon
Model and Size: 200mm
Delivery Time: 2 - 3 working days
200mm Ancon 63 Resin/Mechanical Wall Tie is a masonry remedial wall tie for use for tying together two leaves of solid walls. This RM63 tie has mechanical expanders at one end and a grooved end at the other end to be fixed to the inner leaf that is perforated, or of low-density or friable ..
Brand: Ancon
Model and Size: 200mm
Delivery Time: 3 - 5 days
200mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31 wall tie is s..
Brand: Ancon
Model and Size: 200mm
Delivery Time: 2 - 3 working days
200mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31C wall tie is ..
Brand: Ancon
Model and Size: 200mm
Delivery Time: 2 - 3 working days
200mm Ancon ST1 Wall Tie low conductivity heavy duty stainless steel wall tie that meets the performance requirement of Approved Document E for use in external masonry walls. The enhanced bond makes it ideal for use in slow drying lime mortars. Wall ties should be pressed down in fresh mortar. They ..
£100.41
£120.49 inc VAT
Brand: Ancon
Model and Size: 200mm
Delivery Time: 2 - 3 working days
200mm Ancon Staifix HRT4 Wall Tie is a low conductivity stainless steel masonry wall tie for use in domestic houses up to 10 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be installed as the inner leaf is constructed..
£4.73
£5.68 inc VAT
Brand: Ancon
Model and Size: 200mm
Delivery Time: 2 - 3 working days
200mm Ancon Staifix HRT4 Wall Tie is a low conductivity stainless steel masonry wall tie for use in domestic houses up to 10 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be installed as the inner leaf is constructed..
£22.98
£27.58 inc VAT
Brand: Ancon
Model and Size: 200mm
Delivery Time: 2 - 3 working days
200mm Ancon Staifix HRT4/R Wall Tie is a low conductivity stainless steel masonry remedial wall tie for use in domestic houses up to 10 metres in height. This remedial HRT/R wall tie is used for tying the two leafs of a cavity wall or separating wall where the first leaf has already been built...
Brand: Ancon
Model and Size: 200mm
Delivery Time: 2 - 3 working days
200mm Staifix Resin/Resin Wall Tie is a masonry remedial wall tie for use for tying together two leaves of solid walls. This RR tie is used where mechanical expanders are unusable. Resin is added to both ends. A plastic sieve can be used to retain resin and is particularly useful in perfor..
Brand: Ancon
Model and Size: 200mm
Delivery Time: 2 - 3 working days
200mm Ancon Staifix RT2 Wall Tie is a low conductivity stainless steel general purpose wall tie for use in domestic houses and small commercial buildings up to 15 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be inst..
£6.04
£7.25 inc VAT
Brand: Ancon
Model and Size: 200mm
Delivery Time: 2 - 3 working days
200mm Ancon Staifix RT2 Wall Tie is a low conductivity stainless steel general purpose wall tie for use in domestic houses and small commercial buildings up to 15 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be inst..
£42.91
£51.49 inc VAT
Brand: Ancon
Model and Size: 200mm
Delivery Time: 3 - 5 days
200mm Ancon Teplo-BF-1 Wall Tie is a smart black heavy duty composite wall tie manufactured from pultruded basalt fibres with a thermal conductivity of 0.7 W/mK, which helps to prevent heat escape from the building. The Teplo-BF-1 has specialised moulded safety ends which offer improved buildab..
£2.42
£2.90 inc VAT
Guide Price
Brand: Ancon
Model and Size: 200mm
Delivery Time: 3 - 5 days
200mm Ancon Teplo-BF-2 Wall Tie is a smart black general purpose composite wall tie manufactured from pultruded basalt fibres with a thermal conductivity of 0.7 W/mK, which helps to prevent heat escape from the building. The Teplo-BF-2 has specialised moulded safety ends which offer improved buildab..
Guide Price: £1.80
£2.16 inc VAT
Guide Price
Brand: Ancon
Model and Size: 200mm
Delivery Time: 3 - 5 days
200mm Ancon Teplo-BF-4 Wall Tie is a smart black composite light duty type 4 wall tie manufactured from pultruded basalt fibres with a thermal conductivity of 0.7 W/mK, which helps to prevent heat escape from the building. The Teplo-BF-4 has specialised moulded safety ends which offer improved build..
Guide Price: £1.15
£1.38 inc VAT
Brand: Arbet
Model and Size: 1000mm x 500mm - 1.5m2
Delivery Time: 5 - 7 days
200mm Grey Polystyrene (Graphite) is a high quality expanded polystyrene (EPS) board enhanced with integrated graphite within its bead structure and of grey colour. The high-purity graphite particles integrated within the insulation beads reflects radiant heat and significantly improves insulat..
£39.33
£47.20 inc VAT
Brand: Rockwool
Model and Size: 1000mm x 600mm - 1.20m2
Delivery Time: 3 - 5 weeks
200mm Rockwool Frontrock MAX E is a rigid dual-density thermal and acoustic insulation slab made from volcanic rock, making it extremely durable, fire-resistant, and specifically designed for external wall applications to be placed directly beneath render. The higher density surface of the slab is i..
Brand: Rockwool
Model and Size: 1000mm x 600mm - 1.20m2
Delivery Time: 5 - 7 days
200mm Rockwool Frontrock Super Dual Density External Wall Insulation Slab 1000mm x 600mm (pack of 2)
200mm Rockwool Frontrock Super is a high‑performance, mineral‑wool board designed specifically for external wall insulation (EWI) systems. It combines two distinct density layers in a single panel to deliver both excellent thermal performance and robust structural support. The core of the slab is a ..
Brand: Arbet
Model and Size: 1000mm x 500mm - 1.5m2
Delivery Time: 5 - 7 days
200mm White Polystyrene Board is a very lightweight and easy to handle and install, expanded polystyrene (EPS) board specially designed to be used as a part of various external wall insulation systems. It can be used in applications requiring transfer of small mechanical loads.Please note polystyren..
£36.29
£43.55 inc VAT