200mm Ancon Staifix HRT4 Stainless Steel Wall Tie - Masonry Light Duty Tie - Type 4 - pack of 20




200mm Ancon Staifix HRT4 Stainless Steel Wall Tie - Masonry Light Duty Tie - Type 4 - pack of 20
Price: £4.73 (£5.68 inc VAT)
- Product Code: A1-5338
- Delivery Time: 2 - 3 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model and Size: 200mm
Our ratings on 05-08-2025:

4.8 out of 5
This product has a minimum quantity of 28
Show other sizes
200mm Ancon Staifix HRT4 Stainless Steel Wall Tie - Masonry Light Duty Tie - Type 4 - pack of 20
Length: 200mm
Pack Quantity: 20
Cavity width: 50-75mm
200mm Ancon Staifix HRT4 Wall Tie is a low conductivity stainless steel masonry wall tie for use in domestic houses up to 10 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be installed as the inner leaf is constructed and not simply pushed into a joint. Ideally, ties should be installed level or with a slight fall to the outer leaf. Ancon Staifix HRT4 wall tie should be positioned centrally as a drip will normally be near the centre of the open section of a partial fill cavity.
CHARACTERISTICS
- Masonry-to-masonry wall tie,
- For use in domestic houses up to 10 metres in height
- Light duty type 4 wall tie,
- Meets the performance requirement of Approved Document E for use in external masonry walls,
- Suitable for cavities of 50-75mm,
Brand: Ancon
Model and Size: Starter tie with c/w plug - pack of 100
Delivery Time: 3 - 5 days
Ancon Staifix Starter Tie with c/w Plug is a screw-in tie supplied with an 8mm nylon plug for joining new masonry to existing walls without the need for jointing. Ideal for the construction of conservatories, extensions and garden walls ..
£46.33
£55.60 inc VAT
Brand: Ancon
Model and Size: SD25/125
Delivery Time: 2 - 5 working days
Ancon SD25/125 Channel Wall Ties with a safety ended v drip for 60-84mm open cavity for Ancon 25/14 channel to be fixed to an outer leaf of brickwork. They are placed in the channel by rotating through 90° and can be easily moved to the required position to be built into the masonry bed joint.&..
Brand: Ancon
Model and Size: 200mm
Delivery Time: 2 - 3 working days
200mm Ancon Staifix HRT4 Wall Tie is a low conductivity stainless steel masonry wall tie for use in domestic houses up to 10 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be installed as the inner leaf is constructed..
£22.98
£27.58 inc VAT
Brand: Ancon
Model and Size: 240mm - 5mm
Delivery Time: 3 - 5 days
240mm Ancon Teplo-L-Tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It has stainless steel upstand with a 7mm fixing hole for a second..
Guide Price: £1.88
£2.26 inc VAT
Brand: Ancon
Model and Size: 250mm
Delivery Time: 2 - 3 working days
250mm Ancon Staifix HRT4/R Wall Tie is a low conductivity stainless steel masonry remedial wall tie for use in domestic houses up to 10 metres in height. This remedial HRT/R wall tie is used for tying the two leafs of a cavity wall or separating wall where the first leaf has already been built...
Brand: Ancon
Model and Size: 180mm - BFL-7
Delivery Time: 1-3 working days
180mm Ancon Teplo-BFL-7 Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFL-5 Wall Tie has a..