250mm Ancon Staifix HRT4 Stainless Steel Wall Tie - Masonry Light Duty Tie - Type 4 - pack of 20




250mm Ancon Staifix HRT4 Stainless Steel Wall Tie - Masonry Light Duty Tie - Type 4 - pack of 20
Price: £6.53 (£7.84 inc VAT)
- Product Code: A1-5340
- Delivery Time: 2 - 3 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model and Size: 250mm
Our ratings on 30-06-2025:

4.8 out of 5
This product has a minimum quantity of 20
Show other sizes
250mm Ancon Staifix HRT4 Stainless Steel Wall Tie - Masonry Light Duty Tie - Type 4 - pack of 20
Length: 250mm
Pack Quantity: 20
Cavity width: 101-125mm
250mm Ancon Staifix HRT4 Wall Tie is a low conductivity stainless steel masonry wall tie for use in domestic houses up to 10 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be installed as the inner leaf is constructed and not simply pushed into a joint. Ideally, ties should be installed level or with a slight fall to the outer leaf. Ancon Staifix HRT4 wall tie should be positioned centrally as a drip will normally be near the centre of the open section of a partial fill cavity.
CHARACTERISTICS
- Masonry-to-masonry wall tie,
- For use in domestic houses up to 10 metres in height
- Light duty type 4 wall tie,
- Meets the performance requirement of Approved Document E for use in external masonry walls,
- Suitable for cavities of 101-125mm,
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm Resin/Resin Wall Tie is a masonry remedial wall tie designed as a remedial tie for a separating wall. This RR Type A wall tie will normally be inserted in 10mm Ø holes and resin-bonded into both leaves. It meets the requirements of a Type A wall tie to Approved Document E.CHARACTERIS..
Brand: Ancon
Model and Size: 2.7m
Delivery Time: 2 - 5 working days
Ancon 25/14 Stainless Steel Channel - 2700mm Length is used to fix an outer leaf of brickwork through any kind of insulation to a steel frame structure or to a concrete wall. Self-drilling high-thread screws are used to drill through the rigid insulation on to a st..
Brand: Ancon
Model and Size: 200mm
Delivery Time: 3 - 5 days
200mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31 wall tie is s..
Brand: Ancon
Model and Size: 585mm
Delivery Time: 1-3 working days
585mm Ancon Teplo-BFR Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFR Wall Tie is a 7mm ..
Brand: Ancon
Model and Size: 300mm
Delivery Time: 2 - 3 working days
300mm Ancon 63 Mechanical/Mechanical Wall Tie is a masonry remedial wall tie for use for tying together two leaves of solid walls. This MM63 tie has mechanical expanders at each end. Requires 12mm Ø holes. These remedial ties are used on older building, where brickwork had been cracked due..
Brand: Ancon
Model and Size: 230mm - BFL-7
Delivery Time: 1-3 working days
255mm Ancon Teplo-BFL-7 Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFL-5 Wall Tie has a..