590mm Ancon Teplo-R Wall Tie - Remedial Wall Tie - for 450mm Cavity
590mm Ancon Teplo-R Wall Tie - Remedial Wall Tie - for 450mm Cavity
- Product Code: A1-5405
- Delivery Time: 2 - 3 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model: 590mm
Our ratings on 12-06-2026:
4.8 out of 5
590mm Ancon Teplo-R Wall Tie - Remedial Wall Tie - for 450mm Cavity
Length: 590mm
Pack Quantity: 1
Cavity width: 450mm
590mm Ancon Teplo-R Wall Tie is a remedial wall tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It is a plain-ended basalt fibre wall tie that can be resin-fixed in remedial and retrofit applications. This tie has a thermal conductivity of only 0.7 W/mK. Requires Ø10mm hole. A stainless steel sieve may be used to retain resin and is particularly useful in perforated brick or hollow blockwork. A 12mm hole is required to fit the sieve.
CHARACTERISTICS
- Manufactured from basalt fibres set in a resin matrix,
- 7mm diameter,
- Suitable for 450mm cavity.
Brand: Ancon
Model: 315mm
Delivery Time: 2 - 3 working days
315mm Ancon Teplo-R Wall Tie is a remedial wall tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It is a plain-ended basalt fibre wall ..
Brand: Ancon
Model: 225mm
Delivery Time: 2 - 3 working days
225mm Ancon Staifix HRT4 Wall Tie is a low conductivity stainless steel masonry wall tie for use in domestic houses up to 10 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be installed as the inner leaf is constructed..
£23.52
£28.22 inc VAT
Brand: Ancon
Model: SD25/100
Delivery Time: 2 - 5 working days
Ancon SD25/100 Channel Wall Ties with a safety ended v drip for 35-59mm open cavity for Ancon 25/14 channel to be fixed to an outer leaf of brickwork. They are placed in the channel by rotating through 90° and can be easily moved to the required position to be built into the masonry bed joint.&..
Brand: Ancon
Model: 225mm
Delivery Time: 2 - 3 working days
225mm Ancon 63 Mechanical/Mechanical Wall Tie is a masonry remedial wall tie for use for tying together two leaves of solid walls. This MM63 tie has mechanical expanders at each end. Requires 12mm Ø holes. These remedial ties are used on older building, where brickwork had been cracked due..
Brand: Ancon
Model: 265mm
Delivery Time: 2 - 3 working days
265mm Ancon Teplo-R Wall Tie is a remedial wall tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It is a plain-ended basalt fibre wall ..
Brand: Ancon
Model: 82mm - bag of 100
Delivery Time: 2 - 5 working days
Ancon HTSS-82-2PT-W Screws are used to fix an outer leaf of brickwork through any kind of insulation to a steel frame structure. These screws feature a shaped drill tip of hardened steel that allows installation without pre-drilling. Ancon HTSS-82-2PT-W high thread screws accommodate ..