565mm Ancon Teplo-R Wall Tie - Remedial Wall Tie - for 425mm Cavity
565mm Ancon Teplo-R Wall Tie - Remedial Wall Tie - for 425mm Cavity
- Product Code: A1-5404
- Delivery Time: 2 - 3 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model: 565mm
Our ratings on 07-01-2026:
4.8 out of 5
565mm Ancon Teplo-R Wall Tie - Remedial Wall Tie - for 425mm Cavity
Length: 540mm
Pack Quantity: 1
Cavity width: 425mm
565mm Ancon Teplo-R Wall Tie is a remedial wall tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It is a plain-ended basalt fibre wall tie that can be resin-fixed in remedial and retrofit applications. This tie has a thermal conductivity of only 0.7 W/mK. Requires Ø10mm hole. A stainless steel sieve may be used to retain resin and is particularly useful in perforated brick or hollow blockwork. A 12mm hole is required to fit the sieve.
CHARACTERISTICS
- Manufactured from basalt fibres set in a resin matrix,
- 7mm diameter,
- Suitable for 425mm cavity.
Brand: Ancon
Model: 180mm - bag of 100
Delivery Time: 2 - 5 working days
Ancon HTSS-240-2PT-W Screws are used to fix an outer leaf of brickwork through any kind of insulation to a steel frame structure. These screws feature a shaped drill tip of hardened steel that allows installation without pre-drilling. Ancon HTSS-240-2PT-W high thread screws accommodate 165-220mm thi..
Brand: Ancon
Model: 225mm
Delivery Time: 2 - 3 working days
225mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31C wall tie is ..
Brand: Ancon
Model: Teplo-BF-CT-25/250
Delivery Time: 2 - 5 working days
Ancon Teplo-BF-CT-25/250 Channel Wall Tie made of basalt fibres set in a resin matrix to provide a low thermal conductivity wall tie for 185-209mm open cavity for Ancon 25/14 channel to be fixed to an outer leaf of brickwork. The thermal efficiency these ties are excluded from U-value calculations t..
Brand: Ancon
Model: 225mm
Delivery Time: 2 - 3 working days
225mm Ancon Staifix RT2 Wall Tie is a low conductivity stainless steel general purpose wall tie for use in domestic houses and small commercial buildings up to 15 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be inst..
£44.36
£53.23 inc VAT
Brand: Ancon
Model: 340mm
Delivery Time: 2 - 3 working days
340mm Ancon Teplo-R Wall Tie is a remedial wall tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It is a plain-ended basalt fibre wall ..
Brand: Ancon
Model: 180mm
Delivery Time: 2 - 3 working days
180mm Staifix Resin/Resin Wall Tie is a masonry remedial wall tie for use for tying together two leaves of solid walls. This RR tie is used where mechanical expanders are unusable. Resin is added to both ends. A plastic sieve can be used to retain resin and is particularly useful in perfor..