Menu
Menu
Your Cart

290mm Ancon Teplo-R Wall Tie - Remedial Wall Tie - for 150mm Cavity

290mm Ancon Teplo-R Wall Tie - Remedial Wall Tie - for 150mm Cavity

Length: 290mm
Pack Quantity: 1
Cavity width: 150mm

290mm Ancon Teplo-R Wall Tie is a remedial wall tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It is a plain-ended basalt fibre wall tie that can be resin-fixed in remedial and retrofit applications. This tie has a thermal conductivity of only 0.7 W/mK. Requires Ø10mm hole. A stainless steel sieve may be used to retain resin and is particularly useful in perforated brick or hollow blockwork. A 12mm hole is required to fit the sieve.

CHARACTERISTICS
  • Manufactured from basalt fibres set in a resin matrix,
  • 7mm diameter,
  • Suitable for 150mm cavity.

250mm Ancon Teplo-BF-4 Wall Tie - Light Duty Type 4
Guide Price
Brand: Ancon Model: 250mm
Delivery Time: 3 - 5 days
250mm Ancon Teplo-BF-4 Wall Tie is a smart black composite light duty type 4 wall tie manufactured from pultruded basalt fibres with a thermal conductivity of 0.7 W/mK, which helps to prevent heat escape from the building. The Teplo-BF-4 has specialised moulded safety ends which offer improved build..
Guide Price: £1.21
£1.45 inc VAT
Brand: Ancon Model: 365mm
Delivery Time: 2 - 3 working days
365mm Ancon Teplo-R Wall Tie is a remedial wall tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It is a plain-ended basalt fibre wall ..
Brand: Ancon Model: 250mm
Delivery Time: 2 - 3 working days
250mm Ancon 63 Mechanical/Mechanical Wall Tie is a masonry remedial wall tie for use for tying together two leaves of solid walls. This MM63 tie has mechanical expanders at each end. Requires 12mm Ø holes. These remedial ties are used on older building, where brickwork had been cracked due..
Brand: Ancon Model: 175mm
Delivery Time: 2 - 3 working days
175mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31 wall tie is s..
Brand: Ancon Model: CFS212
Delivery Time: 2 - 5 working days
Ancon CFS212 Concrete Fixing Screws is used to fix an outer leaf of brickwork through any kind of insulation to a concrete wall. These zinc plated carbon steel screws should be used in combination with Ancon Compression Sleeves in the same length as the insulation thickness being used..
Brand: Ancon Model: 275mm
Delivery Time: 2 - 3 working days
275mm Ancon Staifix RT2 Wall Tie is a low conductivity stainless steel general purpose wall tie for use in domestic houses and small commercial buildings up to 15 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be inst..
£84.12
£100.94 inc VAT
This product is listed in the following categories and systems (click to show).