365mm Ancon Teplo-R Wall Tie - Remedial Wall Tie - for 225mm Cavity
365mm Ancon Teplo-R Wall Tie - Remedial Wall Tie - for 225mm Cavity
- Product Code: A1-5396
- Delivery Time: 2 - 3 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model and Size: 365mm
Our ratings on 09-10-2025:
4.8 out of 5
Teplo-R_Remedial_Wall_Tie_Installation_Guide.pdf
Brand: Ancon
Model and Size: CFS130
Delivery Time: 2 - 5 working days
Ancon CFS130 Concrete Fixing Screws is used to fix an outer leaf of brickwork through any kind of insulation to a concrete wall. These zinc plated carbon steel screws should be used in combination with Ancon Compression Sleeves in the same length as the insulation thickness being used..
Brand: Ancon
Model and Size: CFS100
Delivery Time: 2 - 5 working days
Ancon CFS100 Concrete Fixing Screws is used to fix an outer leaf of brickwork through any kind of insulation to a concrete wall. These zinc plated carbon steel screws should be used in combination with Ancon Compression Sleeves in the same length as the insulation thickness being used. Using the cha..
Brand: Ancon
Model and Size: 430mm - BFL-7
Delivery Time: 1-3 working days
430mm Ancon Teplo-BFL-7 Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFL-5 Wall Tie has a..
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm Resin/Resin Wall Tie is a masonry remedial wall tie designed as a remedial tie for a separating wall. This RR Type A wall tie will normally be inserted in 10mm Ø holes and resin-bonded into both leaves. It meets the requirements of a Type A wall tie to Approved Document E.CHARACTERIS..
Brand: Ancon
Model and Size: 250mm
Delivery Time: 2 - 3 working days
250mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31 wall tie is s..
Brand: Ancon
Model and Size: 200mm
Delivery Time: 2 - 3 working days
200mm Ancon Staifix HRT4 Wall Tie is a low conductivity stainless steel masonry wall tie for use in domestic houses up to 10 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be installed as the inner leaf is constructed..
£22.98
£27.58 inc VAT