230mm Ancon Teplo-BFL-7 Wall Tie for 151 - 175mm Cavity

230mm Ancon Teplo-BFL-7 Wall Tie for 151 - 175mm Cavity
- Product Code: A1-5294
- Delivery Time: 1-3 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model and Size: 230mm - BFL-7
Our ratings on 08-07-2025:

4.8 out of 5
230mm Ancon Teplo-BFL-7 Wall Tie for 151 - 175mm Cavity
Length: 230mm
Pack Quantity: 1
Cavity width: 151 - 175mm
230mm Ancon Teplo-BFL-7 Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFL-5 Wall Tie has a stainless steel upstand that can be mechanically fixed to the outer leaf. The 7mm diameter hole in the upstand suits a variety of fixings, depending on the outer leaf. It has a unique ribbed shank acts as an integral water drip, preventing water from crossing the cavity.
CHARACTERISTICS
- Can be used on concrete, masonry, steel and timber substrates,
- Ultra-low thermal conductivity wall tie,
- Minimises heat loss across an insulated cavity,
- Unique ribbed shank acts as an integral water drip
- BBA Approved and can be used in line with NHBC standards.
Brand: Ancon
Model and Size: 250mm
Delivery Time: 2 - 3 working days
250mm Ancon Staifix HRT4 Wall Tie is a low conductivity stainless steel masonry wall tie for use in domestic houses up to 10 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be installed as the inner leaf is constructed..
£37.40
£44.88 inc VAT
Brand: Ancon
Model and Size: 250mm
Delivery Time: 2 - 3 working days
250mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31 wall tie is s..
Brand: Ancon
Model and Size: 250mm
Delivery Time: 3 - 5 days
250mm Ancon Teplo-BF-1 Wall Tie is a smart black heavy duty composite wall tie manufactured from pultruded basalt fibres with a thermal conductivity of 0.7 W/mK, which helps to prevent heat escape from the building. The Teplo-BF-1 has specialised moulded safety ends which offer improved buildab..
£2.81
£3.37 inc VAT
Brand: Ancon
Model and Size: 135mm - bag of 100
Delivery Time: 2 - 5 working days
Ancon HTSS-135-2PT-W Screws are used to fix an outer leaf of brickwork through any kind of insulation to a steel frame structure. These screws feature a shaped drill tip of hardened steel that allows installation without pre-drilling. Ancon HTSS-135-2PT-W high thread screws accommodat..
Brand: Ancon
Model and Size: Teplo-BF-CT-25/175
Delivery Time: 2 - 5 working days
Ancon Teplo-BF-CT-25/175 Channel Wall Tie made of basalt fibres set in a resin matrix to provide a low thermal conductivity wall tie for 110-134mm open cavity for Ancon 25/14 channel to be fixed to an outer leaf of brickwork. The thermal efficiency these ties are excluded from U-value calculations t..
Brand: Ancon
Model and Size: 200mm
Delivery Time: 3 - 5 days
200mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31 wall tie is s..