155mm Ancon Teplo-BFL-7 Wall Tie for 76-100mm Cavity

155mm Ancon Teplo-BFL-7 Wall Tie for 76-100mm Cavity
- Product Code: A1-5291
- Delivery Time: 1-3 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model and Size: 155mm - BFL-7
Our ratings on 29-08-2025:

4.8 out of 5
155mm Ancon Teplo-BFL-7 Wall Tie for 76-100mm Cavity
Length: 155mm
Pack Quantity: 1
Cavity width: 70-100mm
155mm Ancon Teplo-BFL-7 Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFL-5 Wall Tie has a stainless steel upstand that can be mechanically fixed to the outer leaf. The 7mm diameter hole in the upstand suits a variety of fixings, depending on the outer leaf. It has a unique ribbed shank acts as an integral water drip, preventing water from crossing the cavity.
CHARACTERISTICS
- Can be used on concrete, masonry, steel and timber substrates,
- Ultra-low thermal conductivity wall tie,
- Minimises heat loss across an insulated cavity,
- Unique ribbed shank acts as an integral water drip
- BBA Approved and can be used in line with NHBC standards.
Brand: Ancon
Model and Size: 175mm
Delivery Time: 2 - 3 working days
175mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31 wall tie is s..
Brand: Ancon
Model and Size: 200mm
Delivery Time: 2 - 3 working days
200mm Ancon Staifix RT2 Wall Tie is a low conductivity stainless steel general purpose wall tie for use in domestic houses and small commercial buildings up to 15 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be inst..
£6.04
£7.25 inc VAT
Brand: Ancon
Model and Size: 250mm
Delivery Time: 2 - 3 working days
250mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31 wall tie is s..
Brand: Ancon
Model and Size: SD25/100
Delivery Time: 2 - 5 working days
Ancon SD25/100 Channel Wall Ties with a safety ended v drip for 35-59mm open cavity for Ancon 25/14 channel to be fixed to an outer leaf of brickwork. They are placed in the channel by rotating through 90° and can be easily moved to the required position to be built into the masonry bed joint.&..
Brand: Ancon
Model and Size: 335mm
Delivery Time: 1-3 working days
335mm Ancon Teplo-BFR Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFR Wall Tie is a 7mm ..
Brand: Ancon
Model and Size: 230mm - BFL-7
Delivery Time: 1-3 working days
255mm Ancon Teplo-BFL-7 Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFL-5 Wall Tie has a..