180mm Ancon Teplo-BFL-7 Wall Tie for 101-125mm Cavity

180mm Ancon Teplo-BFL-7 Wall Tie for 101-125mm Cavity
- Product Code: A1-5292
- Delivery Time: 1-3 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model and Size: 180mm - BFL-7
Our ratings on 09-06-2025:

4.8 out of 5
180mm Ancon Teplo-BFL-7 Wall Tie for 101-125mm Cavity
Length: 180mm
Pack Quantity: 1
Cavity width: 101-125mm
180mm Ancon Teplo-BFL-7 Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFL-5 Wall Tie has a stainless steel upstand that can be mechanically fixed to the outer leaf. The 7mm diameter hole in the upstand suits a variety of fixings, depending on the outer leaf. It has a unique ribbed shank acts as an integral water drip, preventing water from crossing the cavity.
CHARACTERISTICS
- Can be used on concrete, masonry, steel and timber substrates,
- Ultra-low thermal conductivity wall tie,
- Minimises heat loss across an insulated cavity,
- Unique ribbed shank acts as an integral water drip
- BBA Approved and can be used in line with NHBC standards.
Brand: Ancon
Model and Size: CFS115
Delivery Time: 2 - 5 working days
Ancon CFS115 Concrete Fixing Screws is used to fix an outer leaf of brickwork through any kind of insulation to a concrete wall. These zinc plated carbon steel screws should be used in combination with Ancon Compression Sleeves in the same length as the insulation thickness being used..
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31C wall tie is ..
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm Ancon Staifix RT2 Wall Tie is a low conductivity stainless steel general purpose wall tie for use in domestic houses and small commercial buildings up to 15 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be inst..
£44.36
£53.23 inc VAT
Brand: Ancon
Model and Size: 435mm
Delivery Time: 1-3 working days
435mm Ancon Teplo-BFR Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFR Wall Tie is a 7mm ..
Brand: Ancon
Model and Size: 250mm
Delivery Time: 2 - 3 working days
250mm Ancon 63 Mechanical/Mechanical Wall Tie is a masonry remedial wall tie for use for tying together two leaves of solid walls. This MM63 tie has mechanical expanders at each end. Requires 12mm Ø holes. These remedial ties are used on older building, where brickwork had been cracked due..
Brand: Ancon
Model and Size: 500mm
Delivery Time: 3 - 5 days
500mm Ancon Teplo-BF-3 Wall Tie is a smart black general purpose composite type 3 wall tie manufactured from pultruded basalt fibres with a thermal conductivity of 0.7 W/mK, which helps to prevent heat escape from the building. The Teplo-BF-3 has specialised moulded safety ends which offer impr..
Guide Price: £4.46
£5.35 inc VAT