200mm Ancon Staifix RT2 General Purpose Stainless Steel Wall Tie - Type2 - pack of 20

200mm Ancon Staifix RT2 General Purpose Stainless Steel Wall Tie - Type2 - pack of 20
Price: £6.04 (£7.25 inc VAT)
- Product Code: A1-5334
- Delivery Time: 2 - 3 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model and Size: 200mm
Our ratings on 27-06-2025:

4.8 out of 5
This product has a minimum quantity of 20
Show other sizes
200mm Ancon Staifix RT2 General Purpose Stainless Steel Wall Tie - Type 2 - pack of 20
Length: 200mm
Pack Quantity: 20
Cavity width: 50-75mm
200mm Ancon Staifix RT2 Wall Tie is a low conductivity stainless steel general purpose wall tie for use in domestic houses and small commercial buildings up to 15 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be installed as the inner leaf is constructed and not simply pushed into a joint. Ideally, ties should be installed level or with a slight fall to the outer leaf. Ancon Staifix RT2 wall tie should be positioned centrally as a drip will normally be near the centre of the open section of a partial fill cavity.
CHARACTERISTICS
- Masonry-to-masonry wall tie,
- For use in domestic houses and small commercial buildings up to 15 metres in height
- General purpose type 2 wall tie,
- Suitable for cavities of 50-75mm,
Brand: Ancon
Model and Size: 500mm
Delivery Time: 3 - 5 days
500mm Ancon Teplo-BF-3 Wall Tie is a smart black general purpose composite type 3 wall tie manufactured from pultruded basalt fibres with a thermal conductivity of 0.7 W/mK, which helps to prevent heat escape from the building. The Teplo-BF-3 has specialised moulded safety ends which offer impr..
Guide Price: £4.46
£5.35 inc VAT
Brand: Ancon
Model and Size: 175mm
Delivery Time: 2 - 3 working days
175mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31C wall tie is ..
Brand: Ancon
Model and Size: 250mm
Delivery Time: 2 - 3 working days
250mm Ancon Staifix RT2 Wall Tie is a low conductivity stainless steel general purpose wall tie for use in domestic houses and small commercial buildings up to 15 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be inst..
£8.24
£9.89 inc VAT
Brand: Ancon
Model and Size: Ancon Uni
Delivery Time: 3 - 5 days
Ancon Universal Insulation Retaining Clip measure 80mm in length and is manufactured from high-quality plastic that ensures a durable product life. These lightweight clips are suitable for use with all standard Ancon stainless steel ties and are used to hold insulation in place. ..
Brand: Ancon
Model and Size: 300mm
Delivery Time: 2 - 3 working days
300mm Ancon 63 Mechanical/Mechanical Wall Tie is a masonry remedial wall tie for use for tying together two leaves of solid walls. This MM63 tie has mechanical expanders at each end. Requires 12mm Ø holes. These remedial ties are used on older building, where brickwork had been cracked due..
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm Ancon Staifix HRT4 Wall Tie is a low conductivity stainless steel masonry wall tie for use in domestic houses up to 10 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be installed as the inner leaf is constructed..
£4.80
£5.76 inc VAT