Search - expansion profile
Search results
Search results
Filter by MANUFACTURER
Guide Price
Brand: Wemico
Model and Size: BrickSlip90
Delivery Time: 1 - 2 days
90mm Wemico aluminium brickslip profile for use in Insulation systems finished with a brick slip detail. These profiles can be powder coated to any standard RAL colour...
Guide Price: £199.89
£239.87 inc VAT
Brand: Wemico
Model and Size: 95509
Delivery Time: 1 - 2 days
90mm Aluminium System Starter Track Profile for Curved Walls for 90mm insulation. Slit the back fixing leg and then bend profile around the curve of the wall. ..
£148.14
£177.77 inc VAT
Brand: James Hardie
Model and Size: 90mm x 3655mm x 25mm
Delivery Time: 3 - 7 days
Hardie Trim NT3 - Fibre Cement Profile - 90mm x 3655mm x 25mm is high quality low maintenance fibre cement trim profile that brings definition and depth to the lines and edges of the façade, tough enough to withstand the elements.Available Colours: Arctic White, Midnight Black & Sail Cloth..
Guide Price
Brand: Wemico
Model and Size: WEC 732 - 90mm
Delivery Time: 1 - 2 days
The WEC 732 profile has an increased drip section to improve visual appearance and a large front face to help prevent water blowing up and soaking the insulation. The new design of drip also allows the end caps to be riveted into position. Manufactured from 1.2mm pre-coated white aluminium, in lengt..
Guide Price: £30.97
£37.16 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 771OT - 90mm
Delivery Time: 1 - 2 days
90mm WEC 771 Verge OverTrim Profile is designed for use in situations where sealing the rear of the profile is possible. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soaking the insulation.Manufactur..
Guide Price: £24.82
£29.78 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 771 - 90mm
Delivery Time: 1 - 2 days
90mm WEC 771 Verge Trim Profile is designed for use in situations where sealing the rear of the profile is possible. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soaking the insulation.Manufactured i..
Guide Price: £21.44
£25.73 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 781 - 90mm
Delivery Time: 1 - 2 days
The WEC 781 Grind in Verge Trim Profile is designed for use in situations where there are problems sealing the rear of the profile. It is also a cost effective way to seal the system instead of increasing the roof line. This profile also has an increased drip section to improve visual appearance and..
Guide Price: £32.06
£38.47 inc VAT
Guide Price
Brand: Wemico
Model and Size: WEC 791 - 90mm
Delivery Time: 3 - 7 days
The WEC 791 profile has an up-stand that can be pushed under a barge board. This reduces the need for a mastic seal and removes future maintenance issues. This profile also has an increased drip section to improve visual appearance and a large front face to help prevent the water blowing up and soak..
Guide Price: £31.34
£37.61 inc VAT
Guide Price
Brand: Wemico
Model and Size: Verge Trim End Cap - 90mm
Delivery Time: 1 - 2 days
90mm WEC End Cap for Verge Trim Profiles can be used with; WEC 771, WEC 781, WEC 791 AND IGT range of profiles. Manufactured in 1.2mm pre-coated white aluminium...
Guide Price: £5.72
£6.86 inc VAT
Brand: Wemico
Model and Size: 3752
Delivery Time: 1 - 2 days
50m roll of PVC Corner profile with alkali resistant glass fibre mesh wings 90mm x 110mm, which allows it to be cut to the required length and reduces waste. Can be folded to any angle...
£100.47
£120.56 inc VAT
Brand: Wemico
Model and Size: 37909
Delivery Time: 2 - 3 working days
9mm self adhesive PVC profile for use on window reveals or door frames. Attached to the frame with a foam tape, the frameseal has an adhesive strip to enable use of a protective film to be applied during the rendering process, which is snapped off on completion. Profile 37909..
Brand: Wemico
Model and Size: 38909
Delivery Time: 2 - 3 working days
9mm self adhesive PVC profile for use on window reveals or door frames. Attached to the frame with a foam tape, the frameseal has an adhesive strip to enable use of a protective film to be applied during the rendering process, which is snapped off on completion. Profile 38909..
Brand: Wemico
Model and Size: 3726
Delivery Time: 1-3 working days
9mm self adhesive PVC profile a self adhesive PVC profile for use on window reveals or door frames. This profile can be attached to the frame with a foam tape, the frameseal has an adhesive strip to enable use of a protective film to be applied during the rendering process, which is pulled off on co..
£214.00
£256.80 inc VAT
Brand: Wemico
Model and Size: 3712
Delivery Time: 2 - 3 working days
9mm self adhesive PVC profile a self adhesive PVC profile for use on window reveals or door frames. This profile can be attached to the frame with a foam tape, the frameseal has an adhesive strip to enable use of a protective film to be applied during the rendering process, which is pulled off on co..
Brand: Etex Exteriors
Model and Size: Connection Profile - 3m
Delivery Time: 1 - 2 days
Aluminium Connection Profile for Cedral is an universal aluminium trim used to wrap around the edge of the weatherboard on a window or door reveal or along the soffit line. Available at 3m lengths. Colour match to Cedral plank available.
&nb..
£20.85
£25.02 inc VAT
Brand: Etex Exteriors
Model and Size: 45mm - 3m
Delivery Time: 1 - 2 days
Aluminium End Profile for Cedral Lap is an universal aluminium trim end 45mm that can be used vertically at the end of a cladding run to butt the boards against, protecting the weatherboard and giving a straight edge framing to clad area. Available at 3m lengths. Colour match to Cedral Lap plan..
£25.63
£30.76 inc VAT
Brand: Etex Exteriors
Model and Size: 65mm - 3m
Delivery Time: 1 - 2 days
Aluminium End Profile for Cedral Lap is an universal aluminium trim end 65mm that can be used vertically at the end of a cladding run to butt the boards against, protecting the weatherboard and giving a straight edge framing to clad area. Available at 3m lengths. The End profile 65 will al..
£29.87
£35.84 inc VAT
Brand: Wemico
Model and Size: 9080
Delivery Time: 1 - 2 days
Aluminium Facade Corner Profile Without Covered Cutting Edges - Profile 9080 length of 2.5m. Corner profiles cover the cutting edges of the facade boards and form a clean, precise edge. Vertical corner profiles must be fastened at one fixed point at the top. If conditions require multiple faste..
Brand: Wemico
Model and Size: 9400
Delivery Time: 1 - 2 days
Aluminium Facade Corner Profile Without Covered Cutting Edges - Profile 9400 length of 2.5m. Corner profiles cover the cutting edges of the facade boards and form a clean, precise edge. Vertical corner profiles must be fastened at one fixed point at the top. If conditions require multiple faste..
Brand: Wemico
Model and Size: 9402
Delivery Time: 1 - 2 days
Aluminium Facade Corner Profile Without Covered Cutting Edges - Profile 9402 length of 2.5m. Corner profiles cover the cutting edges of the facade boards and form a clean, precise edge. Vertical corner profiles must be fastened at one fixed point at the top. If conditions require multiple faste..
Brand: Wemico
Model and Size: 9430
Delivery Time: 1 - 2 days
Aluminium Facade Corner Profile Without Covered Cutting Edges - Profile 9430 length of 3m. Corner profiles cover the cutting edges of the facade boards and form a clean, precise edge. Vertical corner profiles must be fastened at one fixed point at the top. If conditions require multiple fasteni..
Brand: Wemico
Model and Size: 9440
Delivery Time: 1 - 2 days
Aluminium Facade Corner Profile Without Covered Cutting Edges - Profile 9440 length of 3m. Corner profiles cover the cutting edges of the facade boards and form a clean, precise edge. Vertical corner profiles must be fastened at one fixed point at the top. If conditions require multiple fastening po..
Brand: Wemico
Model and Size: 9441
Delivery Time: 1 - 2 days
Aluminium Facade Corner Profile Without Covered Cutting Edges - Profile 9441 Anodised Finish length of 3m. Corner profiles cover the cutting edges of the facade boards and form a clean, precise edge. Vertical corner profiles must be fastened at one fixed point at the top. If conditions require ..
Brand: Wemico
Model and Size: 9442
Delivery Time: 1 - 2 days
Aluminium Facade Corner Profile Without Covered Cutting Edges - Profile 9442 length of 3m. Corner profiles cover the cutting edges of the facade boards and form a clean, precise edge. Vertical corner profiles must be fastened at one fixed point at the top. If conditions require multiple fasteni..
Brand: Wemico
Model and Size: 9443
Delivery Time: 1 - 2 days
Aluminium Facade Corner Profile Without Covered Cutting Edges - Profile 9443 Anodised Finish length of 3m. Corner profiles cover the cutting edges of the facade boards and form a clean, precise edge. Vertical corner profiles must be fastened at one fixed point at the top. If conditions require ..
Brand: Wemico
Model and Size: 9460
Delivery Time: 1 - 2 days
Aluminium Facade Corner Profile Without Covered Cutting Edges - Profile 9460 length of 3m. Corner profiles cover the cutting edges of the facade boards and form a clean, precise edge. Vertical corner profiles must be fastened at one fixed point at the top. If conditions require multiple fasteni..
Brand: Wemico
Model and Size: 9461
Delivery Time: 1 - 2 days
Aluminium Facade Corner Profile Without Covered Cutting Edges - Profile 9461 Anodised Finish length of 3m. Corner profiles cover the cutting edges of the facade boards and form a clean, precise edge. Vertical corner profiles must be fastened at one fixed point at the top. If conditions require ..
Brand: Wemico
Model and Size: 9484
Delivery Time: 1 - 2 days
Aluminium Facade Corner Profile Without Covered Cutting Edges - Profile 9484 length of 3m. Corner profiles cover the cutting edges of the facade boards and form a clean, precise edge. Vertical corner profiles must be fastened at one fixed point at the top. If conditions require multiple fasteni..
Brand: Wemico
Model and Size: 9485
Delivery Time: 1 - 2 days
Aluminium Facade Corner Profile Without Covered Cutting Edges - Profile 9485 length of 3m. Corner profiles cover the cutting edges of the facade boards and form a clean, precise edge. Vertical corner profiles must be fastened at one fixed point at the top. If conditions require multiple fasteni..
Brand: Rockpanel
Model and Size: 3055mm
Delivery Time: 7 - 10 days
Aluminium Rockpanel Profile A is a specially designed anodised aluminium chair profile that is suitable for 6, 8 or 10mm thick Rockpanel cladding. these profiles are supplied as standard in anodised aluminium, ensuring an extremely durable finish. The 1.1mm material thickness also minimises the risk..