26mm Monodeck 26C Concrete Floor Acoustic Overlay Board
Guide Price
26mm Monodeck 26C Concrete Floor Acoustic Overlay Board
- Product Code: A1-1291
- Delivery Time: 3 - 5 days
- Brand: Isomass (Tech. support: 08458383389)
- Model and Size: 2400x600mm - 1.44m2
- Weight: 18.80kg
Our ratings on 03-05-2024:
4.7 out of 5 - Excellent
4.8 out of 5
26mm Monodeck 26C Concrete Floor Acoustic Overlay Board
Width: 600mm
Length: 2400mm
Density: 500kg/m3
Weight/m2: 13kg
Weight: 18.8kg
Monodeck 26C is an overlay platform system, designed for reducing sound transmission, including impact sound transmission and improving acoustic performance of concrete floors. The system is used in new build, refurbishment and conversions of concrete floors, able to meet the requirements of the Building Regulations, Approved Document E 2003 (including the subsequent amendments in 2004, 2010 and 2013). The system includes a 8mm Acoustic Chip Foam (ACF) bonded to cross 18mm P5 V313 moisture resistant chipboard.
CHARACTERISTICS
- Great acoustic properties, including the ability to reduce impact sound transmission;
- Able to meet values prescribed by the Approved Document E of the Building Regulations, when installed as part of a complete party floor construction;
- Includes a moisture-resistant chipboard.
APPLICATION
Monodeck 26C is applicable in new build, refurbishment and conversions of structural floors, with a new resilient bar ceiling.
INSTALLATION
- Apply Isocheck Acoustic Angled Flanking Band on the edges of the Isocheck boards just before they are pushed against the perimeter walls to isolate the board from the wall.
- Lay monodeck 26C over dry level screed, in brick bond pattern, applying Isocheck adhesive to all tongued and grooved panel joints.
- A vapour control layer (VCL) will be required when installing monodeck 26C on new screed.
- Install skirting and trim off excess Flanking Band.
CERTIFICATION
The product is in compliance with Approved Document E of the Building Regulations.
Monodeck_26C_Data_Sheet.pdf
Brand: Isomass
Model and Size: 25mm x 10mm x 10m - Free Delivery
Delivery Time: 1 - 2 days
25mm x 10mm x 10m Isocheck Acoustic Isolation Strip is used to enhance acoustic insulation and impact sound transmission in masonry, steel and timber partition and separating walls. The strips are made from a cross linked Isopoli foam and an adhesive backing, which allows the strips to remain in pla..
£30.98
£37.18 inc VAT
Guide Price
Brand: Isomass
Model and Size: 1.25x10m - 12.5m2
Delivery Time: 3 - 5 days
Isocheck Re-Mat Base 5 Acoustic Screed Underlay is an impact improvement under screed system, designed for reducing sound transmission and improving acoustic performance of concrete block and beam floors. The system is used in new build, refurbishment and conversion applications, able to meet t..
Guide Price
Brand: Isomass
Model and Size: 800x1200mm - 0.96m2
Delivery Time: 3 - 5 days
Isocheck PHONEWELL Acoustic Insulation is a breathable system, designed for reducing sound transmission and improving acoustic performance of walls, floors and ceilings. The system is used in timber frame, solid block, concrete buildings and commercial buildings for refurbishment and restoration app..
Guide Price: £76.46
£91.75 inc VAT
Brand: Isomass
Model and Size: 1.5m x 50m - 75m2
Delivery Time: 1 - 2 days
5mm Econocheck Underscreed XL5 system is designed to be placed within a masonry structural floor directly below the screed. This isolates the screed from the structural sub floor, and provides sufficient impact absorption to place it amongst the top performing systems available. The Econocheck Under..
Brand: Isomass
Model and Size: 8/16 - 30mm - 4m Free Delivery
Delivery Time: 1 - 2 days
30mm Isocheck Expandastrip 8/16 is a permanently elastic open cell Polyurethane foam, used as a seal in joints between pre-cast units, sealing around doors and window frames, or between corrugated roofing panels, roof structures and roof lights ventilation and air conditioning ductwork. It is impreg..
Guide Price
Brand: Isomass
Model and Size: 1200mm x 2100mm - 2.52m2
Delivery Time: 1 - 2 days
40mm x 1200mm x 2100mm Isocheck Absorba Ceiling and Wall Panels are designed to absorb sound and reduce reverberation noise. The tiles comprise a fibreglass core with a white speckled laminated coating. They also have reinforced bevel edges contributing to allowing unique wall and ceiling designs. T..