Ceresit CT16 Primer - 10 litres
sale!
Ceresit CT16 Primer - 10 litres
Price: £37.50 (£45.00 inc VAT)
£35.63 (£42.76 inc VAT)
Price per m2: £1.27/m2 (£1.53 inc VAT)
10 or more £33.25 (£39.90 inc VAT)
15 or more £30.88 (£37.06 inc VAT)
20 or more £29.45 (£35.34 inc VAT)
- Product Code: A1-633
- Delivery Time: In Stock 1-2 working days
- Brand: Ceresit
- Model and Size: 10L
- Weight: 10.00kg
Our ratings on 26-04-2024:
4.6 out of 5 - Excellent
4.8 out of 5
Ceresit CT16 Primer - 10 litres
Ceresit CT16 is designed for priming substrates before the application of mineral, acrylic, silicone and silicone-silicate thin-coat renders, finishes and paint coats. Facilitates the application and texturing of plasters, optimize the drying process and improves the plaster-to-substrate adhesion. Provides a uniform substrate, prevents stain build-up on thin-coat and coloured plasters. Designed for brush application on mesh-reinforced layers when insulating walls with Ceresit Ceretherm Systems and on traditional indoor/outdoor plasters.
- Manufactured in more than two hundred colours
- Easier application of render
- Waterproof
- High adhesion to the substrate
- Ready to use
- Indoor and outdoor use
- Insulated renders
- External wall insulation systems
Application and installation of an external wall insulation system
Ceresit EPS and Mineral Wool External Wall Insulation Systems are BBA approved systems.
Once purchased this product is non-returnable.
Please note that we can supply this product cheaper if you buy it with the whole external wall system from us. Contact us for more details.
Ceresit_CT16_Safety_Datasheet.PDF
Guide Price
Brand: Ceresit
Model and Size: 1m x 25m - 25m2
Delivery Time: 2 - 3 working days
Ceresit CT 327 Glass-Fibre Mesh Roll is a reinforcing mesh for embedding into mortars for faades or pedestals exposed to higher stress or higher mechanical loads. It is a part of the Ceresit External Thermal Insulation Composite Systems (ETICS).CHARACTERISTICSAlkali-resistant, Slip proof, Tear proof..
Brand: Ceresit
Model and Size: CT87
Delivery Time: In Stock 1-2 working days
Ceresit CT87 mortar is designed to insulate external walls of the buildings by application of external thermal insulation composite system using EPS- or mineral wool facade boards. It is an element of following ETICS from Ceresit Ceretherm Premium, Express and Wool Premium. CT 87 mortar is used for ..
£27.20
£32.64 inc VAT
sale!
Brand: Ceresit
Model and Size: 1.1m x 50m - 55m2
Delivery Time: In Stock 1-2 working days
Ceresit CT325 Glass-Fibre Mesh is a reinforcing mesh for embedding into mortars for Ceresit External Thermal Insulation Composite Systems (ETICS). For faades or pedestals exposed to higher mechanical loads, it is preferred to use CT 325 in two layers.CHARACTERISTICSAlkali-resistant, Slip proof, Tear..
£61.94
£74.33 inc VAT
Guide Price
Brand: Ceresit
Model and Size: CT17 - 10 litres
Delivery Time: 5 - 7 days
Ceresit CT17 Profi is a deep penetrating primer for priming walls, floors, ceilings inside and outside buildings prior to fixing ceramic tiles, pouring floors, fixing floor lining, papering, puttying, painting, or fixing thermal insulation boards. It is highly recommended for aerated concrete, anhy..
Guide Price: £37.53
£45.04 inc VAT
Guide Price
Brand: Ceresit
Model and Size: CT174 - 25kg 1mm
Delivery Time: 5 - 7 days
1mm grain Ceresit CT 174 Machine is used for making thin-layer renders on concrete substrates, traditional renders, gypsum substrates and chipboards, gypsum cardboards, etc. It combines good points of silicate render and silicone render and is vapour permeable with low absorbability and dirt resista..
sale!
Brand: Ceresit
Model and Size: ZU-25kg
Delivery Time: 1 - 2 days
Ceresit ZU is designed to insulate external walls of the buildings by application of external thermal insulation composite system using polystyrene boards. It is a component of following ETICS from Ceresit Ceretherm Premium, Express and Wool Premium. Ceresit ZU is used for fixing of EPS boards and f..
£15.20
£18.24 inc VAT