Ceresit CT 327 Glass-Fibre Armouring Mesh Roll

Ceresit CT 327 Glass-Fibre Armouring Mesh Roll

Ceresit CT 327 Glass-Fibre Mesh Roll is a reinforcing mesh for embedding into mortars for facades or pedestals exposed to higher stress or higher mechanical loads. It is a part of the Ceresit External Thermal Insulation Composite Systems (ETICS).

CHARACTERISTICS

• Alkali-resistant,
• Slip proof,
• Tear proof,
• High impact resistance.

APPLICATION

• Embed the glass-fiber mesh vertically into the fresh reinforcing mortar, with overlaps of approx. 10 cm in joint areas, then level the surface.
• Embed the webbing into the upper third of the reinforcing layer, and then cover completely with reinforcing mortar, pushing the mesh into it using a metal trowel.
• Properly applied mesh should not be visible and completely covered in the mortar.
• It is important to keep the mesh overlaps on next applied belts to about 10 cm. These overlaps should not coincide with the board joints.
• In the case of openings such as windows the mesh should be sunk further.
• Work should be performed in dry conditions, at temp. of airand the substrate from +5 C to +25 C.

CERTIFICATION

• European Technical Approval (ETA): 13/0086,
• Certificate: 1488-CPR-0407/Z