Ceresit CT325 Glass-Fibre Mesh (roll)

Ceresit CT325 Glass-Fibre Mesh is a reinforcing mesh for embedding into mortars for Ceresit External Thermal Insulation Composite Systems (ETICS). For faades or pedestals exposed to higher mechanical loads, it is preferred to use CT 325 in two layers.

• Alkali-resistant,
• Slip proof,
• Tear proof

The ready prepared Ceresit reinforcing mortar should be spread evenly over the surface of the boards with a tooth trowel with teeth the size of 10-12 mm. In the case of mineral wool boards prior to distribution must also make priming with mortar. In the prepared layer immediately apply Ceresit CT 325 Glass-Fibre Mesh, pushing the mesh into it using a metal trowel. Properly applied mesh should not be visible and completely covered in the mortar. It is important to keep the mesh overlaps on next applied belts to about 10 cm. These overlaps should not coincide with the board joints. In the case of openings such as windows the mesh should be sunk further.

Packaging: 30 rolls of 1,1 m x 50 m on 1 pallet.

Ceresit EPS and Mineral Wool External Wall Insulation Systems are BBA approved systems.