110mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 3)
110mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 3)
- Product Code: A1-4621
- Delivery Time: 1-3 working days
- Brand: Xtratherm (Tech. support: 03712221055)
- Model and Size: 2400x1200mm - 8.64m2
- Weight: 30.41kg
Our ratings on 20-05-2025:
4.8 out of 5
110mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 3)
Width: 1200mm
Length: 2400mm
Pack Coverage: 8.64m2
Pack Quantity: 3
Density: 32kg/m3
Weight/m2: 3.52kg
Weight: 30.41kg
Thermal Conductivity: 0.022W/mK
R-Value: 5m2K/W
Compressive Strength: 150kPa
110mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Suitable for use below single ply mechanically fixed roof membranes.
Note: not suitable for applications with built-up bitumen based roofing or mastic asphalt systems.
APPLICATION
- Flat roof below single ply mechanically fixed roof membranes
CHARACTERISTICS
- Superior performance PIR foam core,
- Vapour-tight aluminium facings on both sides,
- Effective thermal,
- Contributes to limit the risk of condensation,
- Will have life as long as the roof waterproof covering,
- For new build or refurbishment,
- Rot proof and will remain effective for the life span of the building,
- Can be readily cut using a sharp knife or fine toothed saw
CERTIFICATION
BBA_certificate_Xtratherm_FR_ALU.pdf
Brand: Xtratherm
Model and Size: 2400x1200mm - 20.16m2
Delivery Time: 1-3 working days
40mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Suitable for use bel..
Guide Price
Brand: Xtratherm
Model and Size: Thin-R - 2400 x 1200 - 2.88m2
Delivery Time: 1-3 working days
50mm Xtratherm Thin-r is a foil faced Polyisocyanurate (PIR) insulation board formed by a blowing process which generates rigid foam composed of fine cells filled with Pentane blowing agent trapped within the foam. Pentane has very good insulating properties and gives Thin-r superb insulating capabi..
Guide Price: £24.64
£29.57 inc VAT
Brand: Xtratherm
Model and Size: 2400x1200mm - 2.88m2 81mm
Delivery Time: 2 - 3 working days
81mm Xtratherm Safe-R SR/CW Phenolic Soffit Plus Board (75mm Phenolic + 6mm Building Panel) is a foam board is a superior performance ceiling insulation board with enhanced fire performance, consisting of a Class O phenolic foam core with negligible smoke obscuration. Safe-R SR/STP phenolic core is ..
Brand: Xtratherm
Model and Size: 1200x2400mm - 11.52m2
Delivery Time: 1-3 working days
75mm Xtratherm Thin-R Hyfloor XT/HYF is a high performance floor Insulation board with superior thickness to performance ratio allowing the lower targets required under the new Building Regulations to be achieved with minimum thicknesses. Xtratherm Thin-R Hyfloor XT/HYF is a high performance fo..
Guide Price
Brand: Xtratherm
Model and Size: 1200mm x 1200mm - 4.32m2
Delivery Time: 3 - 5 days
Xtratherm FR-MG 120mm is a mineral coated glass faced board. Xtratherm XT/FR MG boards should be laid over the vapour control layer in a break bonded pattern. The long edges of the boards should be laid at right angles to the direction of the substrate and all edges must be fully supported by the de..
Guide Price: £108.78
£130.54 inc VAT
Guide Price
Brand: Xtratherm
Model and Size: 1200mm x 1200mm - 4.32m2
Delivery Time: 1-3 working days
150mm Xtratherm FR-BGM is a PIR insulation board that is faced with a fleece finished bitumen/glass facers and is suitable for use below partially bonded bitumen based built up roofing systems. FR-BGM is suitable to apply torch on felt directly on the insulation. FR-BGM can also be used in mech..
Guide Price: £140.80
£168.96 inc VAT