50mm Unilin FR/MG Flat Roof Board - pack of 10
Guide Price
50mm Unilin FR/MG Flat Roof Board - pack of 10
Guide Price: £181.49 (£217.79 inc VAT)
Price per m2: £12.60/m2 (£15.12 inc VAT)
- Product Code: A1-5277
- Delivery Time: 3 - 5 days
- Brand: Unilin (prev. Xtratherm) (Tech. support: 03712221055)
- Model: 1200mm x 1200mm - 14.4m2
- Weight: 21.60kg
Our ratings on 22-05-2026:
4.8 out of 5
50mm Unilin FR/MG Flat Roof Board - pack of 10
Length: 1200mm
Width: 1200mm
Thickness: 50mm
Pack Quantity: 10
Board Coverage: 1.44m2
Pack Coverage: 14.4m2
Density: 30kg/m3
Weight/m2: 1.5kg
Weight: 21.6kg
Thermal Conductivity: 0.024W/mK
R-Value: 2.08m2K/W
Compressive Strength: 150kPa
50mm Unilin FR/MG is a high performance PIR core with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt. It is compatible with adhesively bonded single ply roofing membranes laid on mechanically fixed or adhered boards.
APPLICATION
- Rooftop decks subject to maintenance traffic,
- Below most single-ply fully adhered and mechanically fixed roof membrane systems or loose laid ballasted roofing systems.
CHARACTERISTICS
- High Thermal Performance,
- Both sides coated with mineral coated glass facers,
- Suitable for full bonding with approved adhesive systems,
- Compatible with adhesively bonded single-ply roofing membranes laid on mechanically fixed boards.
CERTIFICATION
Unilin_FRMG_Datasheet.pdf
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 2.88m2
Delivery Time: 1-3 working days
106mm Unilin FR/TP Thermal Ply Flat Roof Board is a high-performance composite board designed for flat roof applications. It comprises a 100mm rigid polyisocyanurate (PIR) insulation board directly bonded to a 6mm WBP grade plywood. This combination provides both high levels of thermal insulation an..
Brand: Unilin (prev. Xtratherm)
Model: 1200x2400mm - 11.52m2
Delivery Time: 1-3 working days
75mm Unilin Thin-R Hyfloor XT/HYF is a high performance floor Insulation board with superior thickness to performance ratio allowing the lower targets required under the new Building Regulations to be achieved with minimum thicknesses. Unilin Thin-R Hyfloor XT/HYF is a high performance foil faced Po..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 1200mm - 8.64m2
Delivery Time: 3 - 5 days
80mm Unilin FR/MG is a high performance PIR core with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt. It is compatible with adhesively bonded single ply roofing membranes laid on mechanically fixed or adhered boards.
..
Guide Price: £156.09
£187.31 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 2400mm - 2.88m2
Delivery Time: 1-3 working days
29.5mm Unilin Thin-R Thermal Liner XT/TL-MF is a composite insulated panel of 20mm Unilin PIR core with foil faces bonded to 9.5mm tapered edge plasterboard for mechanically fixing to internal walls. Unilin XT/TL-MF is designed to provide high levels of thermal insulation and dry lining in one opera..
Guide Price: £44.46
£53.35 inc VAT
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 11.52m2
Delivery Time: 7 - 10 days
75mm Unilin Safe-R 019/MA (Floors) is a high‑performance phenolic floor insulation board designed to deliver excellent thermal efficiency with minimal thickness. It is commonly used below screeds, timber floors and concrete slabs where achieving low U‑values is essential without increasing floor bui..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 2400mm - 2.88m2
Delivery Time: 1-3 working days
89.5mm Unilin XT/TL Thermal Liner Dot and Dab Insulated Plasterboard is a high performance rigid insulation board made from 80mm Unilin PIR core faced with composite kraft paper bonded to 9.5mm plasterboard, specially designed for internal walls dry lining and insulation, due to its closed cell comp..
Guide Price: £62.39
£74.87 inc VAT