50mm Unilin FR/MG Flat Roof Board - pack of 10
Guide Price
50mm Unilin FR/MG Flat Roof Board - pack of 10
Guide Price: £181.49 (£217.79 inc VAT)
Price per m2: £12.60/m2 (£15.12 inc VAT)
- Product Code: A1-5277
- Delivery Time: 3 - 5 days
- Brand: Unilin (prev. Xtratherm) (Tech. support: 03712221055)
- Model: 1200mm x 1200mm - 14.4m2
- Weight: 21.60kg
Our ratings on 17-04-2026:
4.8 out of 5
50mm Unilin FR/MG Flat Roof Board - pack of 10
Length: 1200mm
Width: 1200mm
Thickness: 50mm
Pack Quantity: 10
Board Coverage: 1.44m2
Pack Coverage: 14.4m2
Density: 30kg/m3
Weight/m2: 1.5kg
Weight: 21.6kg
Thermal Conductivity: 0.024W/mK
R-Value: 2.08m2K/W
Compressive Strength: 150kPa
50mm Unilin FR/MG is a high performance PIR core with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt. It is compatible with adhesively bonded single ply roofing membranes laid on mechanically fixed or adhered boards.
APPLICATION
- Rooftop decks subject to maintenance traffic,
- Below most single-ply fully adhered and mechanically fixed roof membrane systems or loose laid ballasted roofing systems.
CHARACTERISTICS
- High Thermal Performance,
- Both sides coated with mineral coated glass facers,
- Suitable for full bonding with approved adhesive systems,
- Compatible with adhesively bonded single-ply roofing membranes laid on mechanically fixed boards.
CERTIFICATION
Unilin_FRMG_Datasheet.pdf
Brand: Unilin (prev. Xtratherm)
Model: 1200x600mm - 2.88m2
Delivery Time: 1-3 working days
75mm Unilin Stonewool SW/RS Insulation Slab is a non-combustible Euroclass A1 stone wool insulation used as ventilated rainscreen façade and framing applications and curtain walling. Unilin Stonewool SW/RS insulation provides a uniform, high density solution providing resilience during the buil..
Brand: Unilin (prev. Xtratherm)
Model: 2400x1200mm - 8.64m2
Delivery Time: 2 - 3 working days
120mm Unilin Safe-R SR/FB Phenolic foam is a superior performance rigid insulation framing board with enhanced fire performance, consisting of an Euroclass B-s1, d0 phenolic foam core with negligible smoke obscuration. Unilin Safe-R SR is faced with low emissivity aluminium facings both sides, and h..
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 450mm - 1.62m2
Delivery Time: 7 - 10 days
120mm Unilin Safe-R 019/CW Phenolic Partial Fill Cavity Insulation Board is a high‑performance phenolic insulation panel designed for traditional masonry cavity walls. It delivers excellent thermal efficiency while preserving a clear residual cavity, helping protect buildings from wind‑driven rain. ..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 2400mm - 2.88m2
Delivery Time: 1-3 working days
112.5mm Unilin Thin-R Thermal Liner XT/TL-MF is a composite insulated panel of 25mm Unilin PIR core with foil faces bonded to 12.5mm tapered edge plasterboard for mechanically fixing to internal walls. Unilin XT/TL-MF is designed to provide high levels of thermal insulation and dry lining in one ope..
Guide Price: £74.18
£89.02 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200x450mm - 3.24m2
Delivery Time: 2 - 4 days
70mm Unilin ThinR XT/CW Partial Fill Cavity Wall Insulation Board is a PIR insulation board with a high thermal performance whilst maintaining a residual cavity in the external walls. This board achieves high standards of insulation with a certified thermal conductivity of 0.022W/mK with the optiona..
Guide Price: £48.54
£58.25 inc VAT
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 8.64m2
Delivery Time: 7 - 10 days
130mm Unilin Safe-R 019/MA (Floors) is a high‑performance phenolic floor insulation board designed to deliver excellent thermal efficiency with minimal thickness. It is commonly used below screeds, timber floors and concrete slabs where achieving low U‑values is essential without increasing floor bu..