37mm Monodeck 37T Timber Floor Acoustic Overlay Board - 2400mm x 600mm






37mm Monodeck 37T Timber Floor Acoustic Overlay Board - 2400mm x 600mm
- Product Code: A1-5209
- Delivery Time: 3 - 5 days
- Brand: Isomass (Tech. support: 08458383389)
- Model and Size: 2400mm x 600mm - 1.44m2
- Weight: 23.50kg
Our ratings on 01-08-2025:

4.8 out of 5
37mm Monodeck 37T Timber Floor Acoustic Overlay Board - 2400mm x 600mm
Length: 2400mm
Width: 600mm
Thickness: 37mm
Board Coverage: 1.44m2
Weight/m2: 16.32kg
Weight: 23.5kg
Airbourne sound insulation: 52dB
Impact Sound Insulation: 51dB
Resilient layer thickness: 15mm
37mm Monodeck 37T is an acoustic insulation overlay platform system bonded direct to floorboards, designed for soundproofing and improving acoustic performance of timber floors, whenever finished floor height is not critical. Monodeck 37T is used in new build, refurbishment and conversion applications, able to reduce impact sound transmission in wooden floors and able to meet the requirements of the Building Regulations, Approved Document E 2003 (including the subsequent amendments in 2004, 2010 and 2013). Monodeck 37T consists of 22mm V313 P5 moisture resistant chipboard bonded to 15mm Acoustic Chip Foam (ACF).
CHARACTERISTICS
- Great acoustic properties;
- Able to reduce impact sound transmission in finished wooden floors;
- Able to meet values prescribed by the Approved Document E of the Building Regulations,
- 22mm moisture-resistant chipboard + 15mm Acoustic Chip Foam
APPLICATION
- To be used direct to joists for conversions, refurbishments, new build or listed buildings requiring minimal structural change with a new plasterboard or existing lath and plaster ceiling.
INSTALLATION
- All invasive fittings must be properly treated,
- All structural wall should be sealed,
- The sub-floor, which must be clean and dry, should be covered with proper insulation layer consisting of mineral wool insulation, added between the floor joists,
- The entire structure needs to be watertight,
- The product must be kept and stored in dry conditions.
- Apply Isocheck Acoustic Angled Flanking Band on the edges of the Isocheck boards just before they are pushed against the perimeter walls to isolate the board from the wall.
- Lay Monodeck 37T over a structural timber sub-floor, in brick bond pattern, applying Isocheck adhesive to all tongued and grooved panel joints.
- Install skirting and trim off excess Flanking Band.
CERTIFICATION
The product is in compliance with Approved Document E of the Building Regulations.
Brand: Isomass
Model and Size: 100mm x 10mm x 10m - Free Delivery
Delivery Time: 1 - 2 days
100mm x 10mm x 10m Isocheck Acoustic Isolation Strip is utilised to improve acoustic insulation and reduce impact sound transmission in masonry, steel, and timber partition and separating walls. These strips are crafted from cross-linked Isopoli foam and feature an adhesive backing, ensuring th..
£44.63
£53.56 inc VAT
Brand: Isomass
Model and Size: Deep Batten - 75mm
Delivery Time: 3 - 5 days
75mm Isocheck Deep Batten is part of a suspended floor system, designed for reducing sound transmission and improving acoustic performance of steel and timber floors. The system is used in new build timber and steel frame constructions, including the possibility of combining it with underfloor ..
Guide Price: £6.43
£7.72 inc VAT
Brand: Isomass
Model and Size: 5/9 - 30mm - 4m Free Delivery
Delivery Time: 1 - 2 days
30mm Isocheck Expandastrip 5/9 is a permanently elastic open cell Polyurethane foam, used as a seal in joints between pre-cast units, sealing around doors and window frames, or between corrugated roofing panels, roof structures and roof lights ventilation and air conditioning ductwork. It is impregn..
Brand: Isomass
Model and Size: 1000mm x 1200mm - 1.2m2
Delivery Time: 2 - 3 working days
Isocheck Impact Mat 300 is an impact improvement system, designed for reducing sound transmission and improving acoustic performance of timber floor constructions and staircases, ideal for upgrades of stairs and under floor, due to the improved impact sound resistance. The system is used in new..
Guide Price: £43.35
£52.02 inc VAT
Brand: Isomass
Model and Size: 1200x600mm - 0.72m2
Delivery Time: 3 - 5 days
15mm Isocheck 15T is an overlay platform system bonded direct to floorboards, designed for reducing sound transmission and improving acoustic performance of traditional timber joisted floors. Isocheck 15T is used in new build, refurbishment and conversion applications, able to also reduce impac..
Guide Price: £20.12
£24.14 inc VAT
Brand: Isomass
Model and Size: 138mm x 28mm x 35mm
Delivery Time: 3 - 5 days
Isomass Isocheck Isoblock - 138mm x 28mm x 35mm is a recycled rubber block used to mount the vibration absorbing rolled galvanised steel bars. The recycled rubber blocks are fixed to ceiling joists, timber and metal studs simply and easily secures the Isobar furring channel and decouples the gypsum ..