175mm Ancon AC 31C Wall Tie - Remedial Wall Tie - box of 100

175mm Ancon AC 31C Wall Tie - Remedial Wall Tie - box of 100
- Product Code: A1-5384
- Delivery Time: 2 - 3 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model and Size: 175mm
Our ratings on 09-10-2025:

4.8 out of 5
175mm Ancon AC 31C Wall Tie - Remedial Wall Tie - box of 100
Length: 175mm
Pack Quantity: 100
175mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31C wall tie is similar to the AC 31 but cranked by 25mm to aid fixing to the inner leaf.
CHARACTERISTICS
- Masonry-to-masonry remedial wall tie,
- Cranked by 25mm to aid fixing to the inner leaf.
Brand: Ancon
Model and Size: 215mm
Delivery Time: 2 - 3 working days
215mm Ancon Teplo-R Wall Tie is a remedial wall tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It is a plain-ended basalt fibre wall ..
£2.58
£3.10 inc VAT
Brand: Ancon
Model and Size: 115mm - bag of 100
Delivery Time: 2 - 5 working days
Ancon HTSS-115-2PT-W Screws are used to fix an outer leaf of brickwork through any kind of insulation to a steel frame structure. These screws feature a shaped drill tip of hardened steel that allows installation without pre-drilling. Ancon HTSS-115-2PT-W high thread screws accommodat..
Brand: Ancon
Model and Size: 310mm
Delivery Time: 1-3 working days
310mm Ancon Teplo-BFR Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFR Wall Tie is a 7mm ..
Brand: Ancon
Model and Size: 275mm
Delivery Time: 2 - 3 working days
275mm Ancon ST1 Wall Tie low conductivity heavy duty stainless steel wall tie that meets the performance requirement of Approved Document E for use in external masonry walls. The enhanced bond makes it ideal for use in slow drying lime mortars. Wall ties should be pressed down in fresh mortar. They ..
£141.57
£169.88 inc VAT
Brand: Ancon
Model and Size: CFS130
Delivery Time: 2 - 5 working days
Ancon CFS130 Concrete Fixing Screws is used to fix an outer leaf of brickwork through any kind of insulation to a concrete wall. These zinc plated carbon steel screws should be used in combination with Ancon Compression Sleeves in the same length as the insulation thickness being used..
Brand: Ancon
Model and Size: 560mm
Delivery Time: 1-3 working days
560mm Ancon Teplo-BFR Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFR Wall Tie is a 7mm ..