20mm STEICOtherm Wet Square Edge Wood-Fibre Insulation Slab - 1350mm x 600mm
20mm STEICOtherm Wet Square Edge Wood-Fibre Insulation Slab - 1350mm x 600mm
- Product Code: A1-6958
- Delivery Time: 2 - 4 days
- Brand: Steico
- Model: 1350mm x 600mm - 0.81m2
- Weight: 2.43kg
Our ratings on 03-06-2026:
4.8 out of 5
20mm STEICOtherm Wet Square Edge Wood-Fibre Insulation Slab - 1350mm x 600mm
Length: 1350mm
Width: 600mm
Thickness: 20mm
Single Coverage: 0.81m2
Density: 150kg/m3
Weight/m2: 3kg
Weight: 2.43kg
Thermal Conductivity: 0.038W/mK
R-Value: 0.5m2K/W
20mm STEICOtherm Wet is an ecological, vapour-open insulation board designed for applications where moisture management and thermal mass are critical. The Square Edge (SE) profile makes it particularly suitable for internal wall insulation (IWI) and floor systems where a tight, flush fit is required between slabs.
Each board features a square‑edge profile and two distinct faces:
- a lighter, machine‑sanded side, designed as the plaster‑carrying face, and
- a darker, untreated side, which faces inward during installation.
CHARCTERISTICS
- Fibres bonded using the wood’s own lignin - no synthetic resins.
- Ensures clean, precise installation.
- Light, sanded face for plaster; darker face untreated.
- Low thermal conductivity for improved energy efficiency.
- Vapour‑open and hygroscopic for healthy building physics.
- Dense structure reduces airborne sound transmission.
- Renewable wood fibres with low embodied carbon.
- Fully recyclable and resin‑free.
APPLICATION
- External wall insulation (EWI) systems
- Timber frame external walls
- Pitched roofs (over‑rafter or between‑rafter)
- Internal wall linings
- Renovation and retrofit projects
- Eco‑builds and low‑energy home
CERTIFICATIONS
Steico_therm_technical-data-sheet.pdf
Brand: Steico
Model: 2230mm x 600mm - 37.52m2
Delivery Time: 2 - 4 weeks
80mm STEICO Special Dry is a multi-purpose, rigid wood-fibre insulation board manufactured using the modern Dry Process. It is designed to be installed on top of rafters (sarking) or on the outside of timber frame studs (sheathing). Because it is produced in a dry process, it can be manufacture..
Brand: Steico
Model: 1350mm x 600mm - 59.94m2
Delivery Time: 2 - 4 weeks
30mm STEICOtherm Wet is an ecological, vapour-open insulation board designed for applications where moisture management and thermal mass are critical. The Square Edge (SE) profile makes it particularly suitable for internal wall insulation (IWI) and floor systems where a tight, flush fit is required..
Brand: Steico
Model: 1880mm x 600mm - 1.13m2
Delivery Time: 2 - 4 days
100mm STEICO Special Dry is a multi-purpose, rigid wood-fibre insulation board manufactured using the modern Dry Process. It is designed to be installed on top of rafters (sarking) or on the outside of timber frame studs (sheathing). Because it is produced in a dry process, it can be manufactur..
Brand: Steico
Model: 600ml - pack of 12
Delivery Time: 2 - 4 weeks
STEICOmulti Connect is a professional-grade, permanently elastic adhesive sealant. It is the go-to solution for creating airtight connections between membranes and difficult or uneven substrates, such as masonry, concrete, or rough timber, where traditional tapes might struggle to maintain a continu..
Brand: Steico
Model: 400mm x 1200mm - 13.44m2
Delivery Time: 2 - 4 weeks
80mm STEICO Top is a high-density wood-fibre insulation board with a specially hardened surface. It is designed to be laid directly onto the floor of a cold loft (the ceiling of the room below), providing a quick and efficient way to thermally upgrade a building without the need for a complex timber..
Brand: Steico
Model: 1880mm x 600mm - 40.68m2
Delivery Time: 2 - 4 weeks
60mm STEICO Safe is a multi-functional, rigid wood-fibre insulation board designed for roofs with increased rain protection requirements. It is the only board in the range that can be used on low-pitch roofs (as low as 5°) without the need for an additional full-surface roofing felt or membrane, tha..