Knauf Rotband Internal Plaster - 30 Kg

Knauf Rotband Internal Plaster - 30 Kg

Knauf Rotband is a pre-prepared dry gypsum plaster with special bonding additives designed to create smooth surfaces of any structure on walls and ceilings inside the buildings; used manually as a single layer gypsum plaster on all kinds of substrates. An easy to handle mineral product.

• Mineral product,
• Easy to handle in all stages of the work,
• Suitable for manual plastering,
• Flexible,
• High-performance,
• Single-layer plaster,
• Long processing time,
• Uniform hardening,
• Resistant to impact and pressure,
• Regulates humidity and is vapor permeable,
• Allows walls to breathe,
• Creates a pleasant and healthy climate in rooms,
• Meets fire protection requirements,
• Can be applied up to 50 mm thickness.
  

• To create smooth surfaces, of any substrate or damaged walls and ceilings,
• As a one layer plaster for all types substrates,
• In kitchens and bathrooms ordinary use (e.g. toilets in schools and bathrooms in hotels, hospitals, etc.) where max. humidity is < 70%,
• As a substrate for all types of paints and wallpaper,
• As a substrate for tiling,
• As a substrate for finishing plasters.

• Substrate should be bushed clean and primed. Mix the bag with water (approx. 20 liters) without any additives until you achieve the correct mortar consistency.
  
• Mix thoroughly with clean water water and do not use any additives. Equipment and tools should be cleaned after use immediately with clean water.
• Apply the material to the substrate evenly with a spatula vertically and horizontally. Once the binding starts, align the inner corners with trapezoid spatula.
• The average plaster thickness is 15 mm, the minimum thickness being 8 mm. In special cases on the walls You can apply plaster thickness up to 50 mm.
• To allow quick drying of the plaster, ensure proper ventilation.
• Should not be used when room temperature below +5C.
• Fresh plaster must be protected from frost.

• Tested according to EN 13279-1
• Carries CE mark