Menu
Menu
Your Cart

British Gypsum Thistle Browning Gypsum Undercoat Plaster- 25kg (pallet of 40 bags)

British Gypsum Thistle Browning Gypsum Undercoat Plaster- 25kg (pallet of 40 bags)
British Gypsum Thistle Browning Gypsum Undercoat Plaster- 25kg (pallet of 40 bags)
Price: £479.90 (£575.88 inc VAT)
  • Product Code: A1-1884
  • Delivery Time: Out Of Stock
  • Brand: British Gypsum
  • (Tech. support: 01159456123)
  • Model: 25kg
  • Weight: 25.00kg
Our ratings on 06-01-2026:
Google My Business Reviews
4.8 out of 5

British Gypsum Thistle Browning Gypsum Undercoat Plaster- 25kg (pallet of 40 bags)

Weight: 25kg

Thistle Browning is a gypsum undercoat plaster designed for use on moderate suction backgrounds with an adequate mechanical key. When combined with a final coat of Thistle MultiFinish, Thistle Browning provides a smooth, inert, high-quality surface for internal walls and ceilings, creating a durable base for the application of decorative finishes. This lightweight, retarded hemihydrate, pre-mixed gypsum plaster incorporates expanded perlite aggregate, requiring only the addition of clean water for preparation. Thistle Browning is one of our plaster products that is certified to BES 6001, achieving an 'Excellent' rating.

CHARACTERISTICS

Gypsum plasters offer excellent fire protection due to gypsum's unique behaviour in fire. Materials adjacent to the unexposed side will not exceed 100°C, which is below the temperature at which most materials ignite and far below the critical temperatures for structural components. Once the gypsum layer is fully calcined, the residue acts as an insulating layer while remaining intact.

APPLICATION
  • Concrete,
  • Brick,
  • Blockwork,
  • Sand/cement background,
  • Expanded metal lath,
  • Plasterboard,
  • As an undercoat for Thistle Multi-Finish
INSTALLATION

  • Bags should be stored dry, as water absorption shortens the setting time, causes set lumps to form in the bags, and may reduce the strength of the plasterwork.
  • Skim finishing using Thistle Browning should be done on the smooth face of the board.
  • Thistle plasters should be mixed by adding them to clean water in clean mixing equipment. Contamination from previous mixes adversely affects the setting time and strength. Fresh contamination has more effect than old, so equipment should be washed just after mixing rather than just before.
  • Plaster should be applied with firm pressure, built out to the required thickness in two applications, and trowelled to achieve a smooth matte finish.
  • Gypsum-based plasterwork must always be thoroughly dry before decorating, although a coat of permeable paint can be applied in the interim.
  • Tiles up to 20kg/m² can be applied directly to Thistle Browning, except where the system includes a bonding agent.
CERTIFICATION

  • ISO 9001:2008 Quality Management System,
  • ISO 14001:2004 Environmental Management System,
  • BES 6001:Issue 2 Responsible Sourcing of Construction Products,
  • BS OHSAS 18001:2007 Occupational Health and Safety Management
Environmental Product Declaration
Brand: British Gypsum Model: 60 I 70 'I' Stud - 3.6 m
Delivery Time: 2 - 3 working days
British Gypsum Gypframe 60 I 70 3.6 m 'I' studs provide additional impact resistance due to the improved strength, unlike any other available Gypframe studs. They are usually used in systems with paramount board fixing strength, allowing increased partition height, but retaining the same p..
£23.57
£28.28 inc VAT
Brand: British Gypsum Model: GWR3 - 2.4m
Delivery Time: 3 - 5 days
British Gypsum Gypwall Rapid GWR3 Floor and Ceiling Channel is especially designed to be used with the GypWall RAPID dB PLUS internal wall system incorporating Gyproc SoundBloc RAPID linings, providing not only acoustic insulation but also impact and fire resistance, in accordanc..
£65.18
£78.22 inc VAT
38mm British Gypsum Gyproc Thermaline PIR MR Insulated Plasterboard - (25.5mm PIR and 12.5mm Gyproc MR WallBoard)
Guide Price
Brand: British Gypsum Model: PIR MR - 38mm
Delivery Time: 1 - 5 working days
38mm Gyproc Thermaline PIR MR Insulated Plasterboard consists of a 12.5mm Gyproc Moisture Resistant Board factory bonded to a 25.5mm rigid polyisocyanurate foam (PIR) with a multi-layer Kraft/aluminium facer on both sides of the insulation board and conforms to BS EN 13950. ..
Guide Price: £110.92
£133.10 inc VAT
Brand: British Gypsum Model: 92 I 90 'I' Stud - 6 m
Delivery Time: 2 - 3 working days
British Gypsum Gypframe 92 I 90 6 m 'I' studs provide additional impact resistance due to the improved strength, unlike any other available Gypframe studs. They are usually used in systems with paramount board fixing strength, allowing increased partition height, but retaining the same par..
£488.13
£585.76 inc VAT
12.5mm British Gypsum Rigidur H Impact Resistant Gypsum Fibre Board
Guide Price
Brand: British Gypsum Model: 2400x1200mm - 2.88m2
Delivery Time: 2 - 3 working days
12.5mm British Gypsum Rigidur H is the outer board component in British Gypsum's GypWall EXTREME system with increased rigidity and durability. This system is specifically suited to the varied requirements of large school and hospital projects, offering a solution with superior durability for the mo..
Guide Price: £56.68
£68.02 inc VAT
Brand: British Gypsum Model: MF12 - 27x37x25x1,6 mm
Delivery Time: 2 - 3 working days
British Gypsum Casoline MF12 Soffit Cleat is one of the Casoline MF ceiling accessories, used to provide flat or curved seamless suspended ceilings. It is used to connect the structural soffit to the ceiling system. Use the soffit cleat to mark the fixing points at 1200mm centres and use adequate fi..
£22.30
£26.76 inc VAT
This product is listed in the following categories and systems (click to show).