Ceresit CT87 White Adhesive-Filler Mortar '2 in 1'

Ceresit CT87 mortar is designed to insulate external walls of the buildings by application of external thermal insulation composite system using EPS- or mineral wool facade boards. It is an element of following ETICS from Ceresit Ceretherm Premium, Express and Wool Premium. CT 87 mortar is used for fixing of EPS- or mineral wool facade boards and for applying the reinforcing protection layer to insulate the newly constructed objects as well as older buildings to be thermo-renovated. Ceresit CT 87 is additionally reinforced with fibres, therefore it is more resistant to the formation of cracks and hairlines. The application of CT 87 (colour, surface and organic modifiers) allows for omitting the substrate preparation process by priming with the priming paints before the application of any Ceresit plasters. The content of special light fillers gives the more flexible, light and homogenous consistency, it is easier to be stirred, applied and spread, thus increasing the efficiency of the mortar.

• 2 in 1 does not need priming before the application of plaster
• Considerably lower consumption
• High adhesion to mineral substrates, PIR, Phenolic and EPS boards, mineral wool slabs
• Vapour permeable
• Flexible
• Reinforced with fibres
• Resistant to scratches and cracks
• Resistant to weather conditions

Application and installation of an external wall insulation system

Ceresit EPS and Mineral Wool External Wall Insulation Systems are BBA approved systems.

Once purchased this product is non-returnable.

Please note that we can supply this product cheaper if you buy it with the whole external wall system from us. Contact us for more details.