Everbuild All Purpose Weatherproof Wood Adhesive - 1 Litre - Recommended for JCW Products

Everbuild All Purpose Weatherproof Wood Adhesive is a medium viscosity, resin based polymer emulsion which exceeds the water resistance requirements of BS EN204 D3. It is also suitable for load bearing work as it conforms fully to the BS 14256 Sustained Load requirements.

• Excellent rate of bond strength development,
• High degree of water resistance,
• Interior/exterior use,
• Low timber staining characteristics - will not stain,
• Creep Resistant,
• Dries clear - contains no inert fillers,
• Water based - environmentally friendly/easy clean up.
  

• Apply adhesive thinly to both surfaces.
• Do not over apply as this will slow down cure.
• Clamp surfaces together until adhesive dries. (off in 1-2 hours: full strength 8 hours).
• Support until fully cured (8 hours at 20C).
• When fitting dowels, the adhesive should be applied to the holes.