100mm Unilin Safe-R SR/ST Phenolic Insulation Soffit Board (pack of 4)
100mm Unilin Safe-R SR/ST Phenolic Insulation Soffit Board (pack of 4)
- Product Code: A1-4988
- Delivery Time: 2 - 3 working days
- Brand: Unilin (prev. Xtratherm) (Tech. support: 03712221055)
- Model: 2400x1200mm - 11.52m2
Our ratings on 13-04-2026:
4.8 out of 5
100mm Unilin Safe-R SR/ST Phenolic Insulation Soffit Board (pack of 4)
Length: 2400mm
Width: 1200mm
Thickness: 80mm
Pack Quantity: 4
Board Coverage: 2.88m2
Pack Coverage: 11.52m2
Thermal Conductivity: 0.020W/mK
R-Value: 5m2K/W
Compressive Strength: 120kPa
Fire Rating (Reaction to Fire): C(Class 1)
100mm Unilin Safe-R SR/ST Phenolic foam is a superior performance rigid insulation soffit board with enhanced fire performance, consisting of a C-s1, d0 phenolic foam core with negligible smoke obscuration. Unilin Safe-R SR/ST is faced with low emissivity aluminium facings both sides, and has a thermal conductivity as low as 0.020W/mK.
Note: this product was formerly known as 100mm Xtratherm Safe-R SR/ST Phenolic Insulation Soffit Board
APPLICATION
- Designed for use with steel framed, timber framed and concrete soffits

CHARACTERISTICS
- Superior performance phenolic foam,
- Provides the most efficient U-values with minimal thickness,
- Reduced thermal bridging,
- Effective thermal and fire performance,
- Low smoke obscuration,
- Low risk fire rating - C-s1, d0,
- For new build or refurbishment,
- Rot proof and will remain effective for the life span of the building,
- Can be readily cut using a sharp knife or fine toothed saw.
CERTIFICATION

- ISO 45001 Occupational Health & Safety Management Systems
- ISO 9001 Quality Management Systems
- ISO 14001 Environmental Management Systems
- BBA certified
Brand: Unilin (prev. Xtratherm)
Model: 1200x450mm - 2.16m2
Delivery Time: 2 - 3 working days
75mm Unilin Safe-R SR/CW Phenolic Foam Insulation Board is a superior performance rigid partial fill cavity insulation board with enhanced fire performance, consisting of an Euroclass D-s1, d0 phenolic foam core with negligible smoke obscuration. Unilin Safe-R SR/CW is faced with low emissivity alum..
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 1200mm - 10.08m2
Delivery Time: 3 - 5 days
70mm Unilin FR/MG is a high performance PIR core with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt. It is compatible with adhesively bonded single ply roofing membranes laid on mechanically fixed or adhered boards.
..
Guide Price: £162.53
£195.04 inc VAT
Brand: Unilin (prev. Xtratherm)
Model: 2400x1200 - 11.52m2
Delivery Time: 2 - 3 working days
112.5mm Unilin Safe-R SR/TB-MF is a composite insulated panel of 100mm Phenolic core with a composite foil facing bonded to a 12.5mm tapered edge plasterboard for internal applications, mechanically fixed. Unilin Safe-R SR/TB-MF is designed to provide high levels of thermal insulation and dry lining..
Guide Price: £586.11
£703.33 inc VAT
Brand: Unilin (prev. Xtratherm)
Model: 2400x1200mm - 11.52m2
Delivery Time: 1-3 working days
75mm Unilin Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Unilin Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Unilin Thin-R FR..
Brand: Unilin (prev. Xtratherm)
Model: 2400x1200mm - 14.40m2
Delivery Time: 2 - 3 working days
60mm Unilin Safe-R SR/ST Phenolic foam is a superior performance rigid insulation soffit board with enhanced fire performance, consisting of a C-s1, d0 phenolic foam core with negligible smoke obscuration. Unilin Safe-R SR/ST is faced with low emissivity aluminium facings both sides, and has a therm..
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 11.52m2
Delivery Time: 7 - 10 days
90mm Unilin Safe-R 019/MA (Floors) is a high‑performance phenolic floor insulation board designed to deliver excellent thermal efficiency with minimal thickness. It is commonly used below screeds, timber floors and concrete slabs where achieving low U‑values is essential without increasing floor bui..