75mm Unilin Safe-R SR/ST Phenolic Insulation Soffit Board (pack of 4)
75mm Unilin Safe-R SR/ST Phenolic Insulation Soffit Board (pack of 4)
- Product Code: A1-4986
- Delivery Time: 2 - 3 working days
- Brand: Unilin (prev. Xtratherm) (Tech. support: 03712221055)
- Model: 2400x1200mm - 11.52m2
Our ratings on 12-06-2026:
4.8 out of 5
75mm Unilin Safe-R SR/ST Phenolic Insulation Soffit Board (pack of 4)
Length: 2400mm
Width: 1200mm
Thickness: 75mm
Pack Quantity: 4
Board Coverage: 2.88m2
Pack Coverage: 11.52m2
Thermal Conductivity: 0.021W/mK
R-Value: 3.55m2K/W
Compressive Strength: 120kPa
Fire Rating (Reaction to Fire): C(Class 1)
75mm Unilin Safe-R SR/ST Phenolic foam is a superior performance rigid insulation soffit board with enhanced fire performance, consisting of a C-s1, d0 phenolic foam core with negligible smoke obscuration. Unilin Safe-R SR/ST is faced with low emissivity aluminium facings both sides, and has a thermal conductivity as low as 0.020W/mK.
Note: this product was formerly known as 75mm Xtratherm Safe-R SR/ST Phenolic Insulation Soffit Board
APPLICATION
- Designed for use with steel framed, timber framed and concrete soffits
CHARACTERISTICS
- Superior performance phenolic foam,
- Provides the most efficient U-values with minimal thickness,
- Reduced thermal bridging,
- Effective thermal and fire performance,
- Low smoke obscuration,
- Low risk fire rating - C-s1, d0,
- For new build or refurbishment,
- Rot proof and will remain effective for the life span of the building,
- Can be readily cut using a sharp knife or fine toothed saw.
CERTIFICATION
- ISO 45001 Occupational Health & Safety Management Systems
- ISO 9001 Quality Management Systems
- ISO 14001 Environmental Management Systems
- BBA certified
BBA_Certificate_Unilin_SR-ST_SR-STP.pdf
Brand: Unilin (prev. Xtratherm)
Model: 2400mm x 1200mm - 5.76m2
Delivery Time: 7 - 10 days
160mm Unilin Safe-R 019/MA (Soffit) Phenolic Insulation Board is a high‑performance phenolic insulation board designed for use on the underside of structural ceilings in both commercial and residential buildings. It delivers strong thermal efficiency and reliable fire performance, making it a robust..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 1200mm - 4.32m2
Delivery Time: 3 - 5 days
130mm Unilin FR/MG is a high performance PIR core with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt. It is compatible with adhesively bonded single ply roofing membranes laid on mechanically fixed ..
Guide Price: £139.45
£167.34 inc VAT
Brand: Unilin (prev. Xtratherm)
Model: 2400x1200mm - 11.52m2
Delivery Time: 1-3 working days
70mm Unilin Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Unilin Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Unilin Thin-R FR..
Brand: Unilin (prev. Xtratherm)
Model: 1200x2400mm - 8.64m2
Delivery Time: 1-3 working days
125mm Unilin Thin-R Hyfloor XT/HYF is a high performance floor Insulation board with superior thickness to performance ratio allowing the lower targets required under the new Building Regulations to be achieved with minimum thicknesses. Unilin Thin-R Hyfloor XT/HYF is a high performance foil faced P..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 2400mm - 2.88m2
Delivery Time: 1-3 working days
87.5mm Unilin Thin-R Thermal Liner XT/TL-MF is a composite insulated panel of 75mm Unilin PIR core with foil faces bonded to 12.5mm tapered edge plasterboard for mechanically fixing to internal walls. Unilin XT/TL-MF is designed to provide high levels of thermal insulation and dry lining in one oper..
Guide Price: £53.08
£63.70 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model: 1200mm x 2400mm - 2.88m2
Delivery Time: 1-3 working days
44.5mm Unilin XT/TL Thermal Liner Dot and Dab Insulated Plasterboard is a high performance rigid insulation board made from 35mm Unilin PIR core faced with composite kraft paper bonded to 9.5mm plasterboard, specially designed for internal walls dry lining and insulation, due to its closed cell comp..
Guide Price: £57.82
£69.38 inc VAT