12.5mm Euroform Versarend - Direct Render Base Board - 1200mm x 2400mm

12.5mm Euroform Versarend is a non-combustible exterior grade direct render base cement board with mesh reinforcing facings that can be easily fixed with screws. It can be easy cut, score and snap way, the reinforcing mesh allows it to be easily rendered. Euroform Versarend has a taper on the two long edges of the outer face.

• Economical,
• Easy to install and versatile - can be screwed,
• Suitable for timber and steel frame systems,
• Can be installed in either vertical or horizontal orientation.
• A1 fire rated,
• Impact, vermin and rot resistant,
• Great dimensional stability.

• The boards should lay flat and properly covered with waterproof sheeting, 
• Transport loose boards in vertical position, 
• They should be kept dry before adding the render coating. 
• Brick bond pattern should be used fixing.
• Avoid 4 way joints,
• Use stainless steel self-countersinking and self-drilling screw fixings, 
• Expansion joints should be 3-4mm in single frame assembly and 10mm at the joint of two frame assemblies.