12mm Cedral Click Fibre Cement Tongue and Groove Cladding Board - Smooth - 3.6m length

12mm Cedral Click Fibre Cement Tongue and Groove Cladding Board - Smooth - 3.6m length

Cedral Weatherboard Click Smooth is a premium fibre‑cement cladding plank designed to provide a modern, clean‑lined façade with a smooth, subtly embossed finish. Unlike traditional lap boards, the Cedral Click system uses a tongue‑and‑groove profile with secret clip fixings, creating a flush, contemporary appearance ideal for both residential and commercial buildings. Manufactured in 3,600 mm lengths, the boards offer excellent durability, minimal maintenance, and a long service life, making them a robust alternative to timber weatherboarding. Cedral Click is installed to the ventilated rainscreen principle - air can flow in at the base of the system, behind the cladding and then out, over the top of the Cedral Click weatherboard system. This air flow behind the Cedral Click weatherboard enables the system to remove moisture.

Cedral Click is available in 10 factory applied colours. Other colours within the range, bespoke colours are subject to minimum order quantities and extended lead times.

It is advisable to add 5-10% wastage allowance and add extra boards for window reveals depending on reveal depth.

Usage: 1.64 boards per m2

Available colours:

** May be subject to minimum order quantities and extended lead times.

Available in two finishes: timber and smooth textures. Smooth Cedral planks are available in full pallet quantity and extended lead time. Please check by phoning in. 

CHARACTERISTICS

• Looks like wood,
• Stands up to the harshest weather conditions,
• Resistant to rot,
• Immune to attack by pests and insects,
• Low maintenance,
• Easy to install,
• Easily cut with a handsaw, guillotine, electric jigsaw or circular saw.
• Colour fast,
• Matching aluminium trims,
• Limited combustibility,
• BBA certified,
• Installed life expectancy of at least 50 years,
• Can be crushed and re-used in cement manufacture.
  

INSTALLATION

• Position and fix the vertical battens spaced a maximum of 600mm apart,
• Attach perforated closures to top and bottom of battens,
• Fix vertical profiles and horizontal starter profiles,
• Fix Cedral Click planks, where needed cut to size,
• Fix other detailing.
• Cedral click clips must be placed one on every support to mount the panel above, so the amount depends on the distance between the supports, if @ 400mm, then 11 nos, if @600mm, then 8 nos.

CERTIFICATION

• A+ rating in the BREs Green Guide to Specification,
• BBA Certificate No. 06/4299