200mm STEICO Protect L Dry - Render Carrier Board - 1200mm x 400mm - Pack of 12
200mm STEICO Protect L Dry - Render Carrier Board - 1200mm x 400mm - Pack of 12
- Product Code: A1-6994
- Delivery Time: 2 - 4 weeks
- Brand: Steico
- Model: 1200mm x 400mm - 5.76m2
- Weight: 126.72kg
Our ratings on 27-10-2026:
4.8 out of 5
200mm STEICO Protect L Dry - Render Carrier Board - 1200mm x 400mm - Pack of 12
Length: 1200mm
Width: 400mm
Thickness: 200mm
Board Coverage: 0.48m2
Pack coverage: 5.76m2
Density: 110kg/m3
Weight/m2: 22kg
Weight: 126.72kg
Thermal Conductivity: 0.037W/mK
R-Value: 5.4m2K/W
Compressive Strength: 50kPa
Fire Rating (Reaction to Fire): E
200mm STEICO Protect L Dry is a lightweight, rigid wood-fibre insulation board designed specifically for ETICS (External Thermal Insulation Composite System) applications. It is engineered to be bonded directly to flat, solid surfaces such as masonry, brickwork, or Cross Laminated Timber (CLT), providing a robust, breathable base for external render. STEICO Protect L Dry (where 'L' stands for Light) is the high-performance choice for solid, flat substrates. It offers the best thermal insulation value in the entire Protect range.
CHARCTERISTICS
- With a declared thermal conductivity of 0.037 W/(m⋅K), it is the most insulating board in the Protect series. This allows you to achieve lower U-values with a thinner board compared to the denser H or M variants.
- It is significantly lighter than other render boards. This makes it much easier to handle on-site, especially when working with the thicker panels (up to 240mm) required for high-performance retrofits.
- It is highly breathable. It allows moisture to pass through the wall construction safely, protecting the building fabric from rot and improving indoor air quality.
- Despite its lower density compared to Universal boards, its high specific heat capacity still provides excellent thermal buffering, keeping the interior cool during the summer months.
- Typically supplied with square edge profile, making it ideal for fast installation on flat, mineral substrates where a tongue-and-groove joint is not required for structural racking.
APPLICATION
- Solid Masonry Walls: The ideal choice for retrofitting insulation to existing brick or stone houses.
- Solid Wood Walls (CLT): Perfect for modern mass-timber constructions where a flat, continuous substrate is provided.
- Full-Surface Substrates: Unlike the H or M versions, Protect L Dry must be supported across its entire surface; it is not suitable for fixing directly across open timber studs.
CERTIFICATIONS
Steico_Protect_Dry_Technical_DataSheet.pdf
Brand: Steico
Model: 1.5m x 50m - 75m2
Delivery Time: 2 - 4 days
STEICOmulti Membra 5 is a reinforced, vapour-retarding membrane designed for internal use in roof, wall, and ceiling constructions. It is engineered to create a permanent airtight seal for the building envelope while managing the flow of water vapour into the insulation layer to prevent interstitial..
Brand: Steico
Model: 1880mm x 600mm - 1.13m2
Delivery Time: 2 - 4 days
60mm STEICO Special Dry is a multi-purpose, rigid wood-fibre insulation board manufactured using the modern Dry Process. It is designed to be installed on top of rafters (sarking) or on the outside of timber frame studs (sheathing). Because it is produced in a dry process, it can be manufactured in ..
Brand: Steico
Model: 1190mm x 375mm - 33.45m2
Delivery Time: 2 - 4 weeks
90mm STEICOflex 036 is a flexible, high‑performance wood‑fibre insulation slab designed for exceptional thermal comfort, acoustic absorption and healthy building performance. Made from sustainably sourced wood and certified to rigorous European standards, it offers one of the best thermal conductivi..
Brand: Steico
Model: 1350mm x 200mm
Delivery Time: 2 - 4 weeks
25mm STEICO Fix is a high-density, wedge-shaped insulation profile designed to sit directly beneath external window sills. Its primary function is to provide a thermally efficient, waterproof safety layer that directs any moisture or driving rain away from the structure and back to the outside of th..
Brand: Steico
Model: 1350mm x 500mm - 0.68m2
Delivery Time: 2 - 4 weeks
20mm STEICO Protect Reveal is a rigid, vapour-open wood-fibre insulation board designed for use in ETICS (External Thermal Insulation Composite System) applications. It is the designated substrate for render in the critical areas of window reveals, door returns, and soffits, where space is limited b..
Brand: Steico
Model: 1190mm x 575mm - 13.60m2
Delivery Time: 2 - 4 weeks
220mm STEICOflex 036 is a flexible, high‑performance wood‑fibre insulation slab designed for exceptional thermal comfort, acoustic absorption and healthy building performance. Made from sustainably sourced wood and certified to rigorous European standards, it offers one of the best thermal conductiv..