240mm Ancon Staifix Resin/Resin Wall Tie - RR Remedial Wall Tie - for 101-120mm cavities - 250nos
240mm Ancon Staifix Resin/Resin Wall Tie - RR Remedial Wall Tie - for 101-120mm cavities - 250nos
- Product Code: A1-5374
- Delivery Time: 2 - 3 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model and Size: 240mm
Our ratings on 17-11-2025:
4.8 out of 5
Ancon_Staifix_RR_Installation_Guide.pdf
Brand: Ancon
Model and Size: CFS100
Delivery Time: 2 - 5 working days
Ancon CFS100 Concrete Fixing Screws is used to fix an outer leaf of brickwork through any kind of insulation to a concrete wall. These zinc plated carbon steel screws should be used in combination with Ancon Compression Sleeves in the same length as the insulation thickness being used. Using the cha..
Brand: Ancon
Model and Size: 275mm
Delivery Time: 2 - 3 working days
275mm Ancon Staifix HRT4 Wall Tie is a low conductivity stainless steel masonry wall tie for use in domestic houses up to 10 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be installed as the inner leaf is constructed..
£8.05
£9.66 inc VAT
Brand: Ancon
Model and Size: 405mm - BFL-7
Delivery Time: 1-3 working days
405mm Ancon Teplo-BFL-7 Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFL-5 Wall Tie has a..
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm Ancon Staifix HRT4 Wall Tie is a low conductivity stainless steel masonry wall tie for use in domestic houses up to 10 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be installed as the inner leaf is constructed..
£23.52
£28.22 inc VAT
Brand: Ancon
Model and Size: 415mm
Delivery Time: 2 - 3 working days
415mm Ancon Teplo-R Wall Tie is a remedial wall tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It is a plain-ended basalt fibre wall ..
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm Resin/Resin Wall Tie is a masonry remedial wall tie designed as a remedial tie for a separating wall. This RR Type A wall tie will normally be inserted in 10mm Ø holes and resin-bonded into both leaves. It meets the requirements of a Type A wall tie to Approved Document E.CHARACTERIS..