40mm Xtratherm Safe-R SR/RS Phenolic Insulation Rainscreen Cladding Board (pack of 7)

40mm Xtratherm Safe-R SR/RS Phenolic Insulation Rainscreen Cladding Board (pack of 7)
- Product Code: A1-4555
- Delivery Time: 2 - 3 working days
- Brand: Xtratherm (Tech. support: 03712221055)
- Model and Size: 2400x1200mm - 20.16m2
- Weight: 36.29kg
Product discontinued.
Click Get Best Price to request a quotation and we will recommended an equivalent product.
Our ratings on 17-09-2025:

4.8 out of 5
40mm Xtratherm Safe-R SR/RS Phenolic Insulation Rainscreen Cladding Board (pack of 7)
Width: 1200mm
Length: 2400mm
Pack Coverage: 20.16m2
Pack Quantity: 7
Density: 45kg/m3
Weight/m2: 1.8kg
Weight: 36.29kg
Thermal Conductivity: 0.020W/mK
R-Value: 2m2K/W
Compressive Strength: 125kPa
Fire Rating (Reaction to Fire): B(Class 0)
40mm Xtratherm Safe-R SR/RS Phenolic foam is a superior performance rigid insulation rainscreen cladding board with enhanced fire performance, consisting of a Class O phenolic foam core with negligible smoke obscuration. Safe-R SR/RS is faced with low emissivity aluminium facings both sides, and has a thermal conductivity as low as 0.02W/mK.
APPLICATION
- Designed for use for rainscreen cladding

CHARACTERISTICS
- Superior performance phenolic foam,
- Provides the most efficient U-values with minimal thickness,
- Effective thermal and fire performance,
- Low smoke obscuration,
- Low risk fire rating - Class 0,
- For new build or refurbishment,
- Rot proof and will remain effective for the life span of the building,
- Can be readily cut using a sharp knife or fine toothed saw.
CERTIFICATION
- Manufactured under a quality system approved to EN ISO 9001:2000 (Quality Management Systems)
- Manufactured under an environmental system approved to EN ISO 14001:2004 (Environmental Management Systems)
- Is manufactured without the use of CFC's or HCFC's and has Zero Ozone Depletion Potential
- BBA approved
Brand: Xtratherm
Model and Size: 2400x1200mm - 8.64m2
Delivery Time: 2 - 3 working days
120mm Xtratherm Safe-R SR/UF Phenolic foam is a superior performance rigid underfloor insulation with enhanced fire performance, consisting of a Class O phenolic foam core with negligible smoke obscuration. Safe-R SR is faced with low emissivity aluminium facings both sides, and has a thermal conduc..
Brand: Xtratherm
Model and Size: 2400x1200mm - 11.52m2
Delivery Time: 1-3 working days
100mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Suitable for use be..
Brand: Xtratherm
Model and Size: 1200mm x 1200mm - 14.40m2
Delivery Time: 3 - 5 days
Xtratherm FR-MG 50mm is a mineral coated glass faced board. Xtratherm XT/FR MG boards should be laid over the vapour control layer in a break bonded pattern. The long edges of the boards should be laid at right angles to the direction of the substrate and all edges must be fully supported by the dec..
Guide Price: £181.49
£217.79 inc VAT
Brand: Xtratherm
Model and Size: Thin-R - 2400 x 1200 - 2.88m2
Delivery Time: 1-3 working days
40mm Xtratherm Thin-r is a foil faced Polyisocyanurate (PIR) insulation board formed by a blowing process which generates rigid foam composed of fine cells filled with Pentane blowing agent trapped within the foam. Pentane has very good insulating properties and gives Thin-r superb insulating capabi..
Guide Price: £22.91
£27.49 inc VAT
Brand: Xtratherm
Model and Size: 1200x2400mm - 8.64m2
Delivery Time: 1-3 working days
125mm Xtratherm Thin-R Hyfloor XT/HYF is a high performance floor Insulation board with superior thickness to performance ratio allowing the lower targets required under the new Building Regulations to be achieved with minimum thicknesses. Xtratherm Thin-R Hyfloor XT/HYF is a high performance foil f..
Brand: Xtratherm
Model and Size: 1200mm x 1200mm - 10.8m2
Delivery Time: 3 - 5 days
70mm Xtratherm FR-BGM is a PIR insulation board that is faced with a fleece finished bitumen/glass facers and is suitable for use below partially bonded bitumen based built up roofing systems. FR-BGM is suitable to apply torch on felt directly on the insulation. FR-BGM can also be used in mecha..
Guide Price: £184.42
£221.30 inc VAT