4mm JCW Acoustic Barrier Mat

Guide Price
4mm JCW Acoustic Barrier Mat
Guide Price: £56.82 (£68.18 inc VAT)
Price per m2: £23.68/m2 (£28.41 inc VAT)
To add to cart change quantity to minimum of 15. If you need less, ask for a price or add to a quote list.
- Product Code: A1-1960
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model and Size: 1200mm x 2000mm - 2.40m2
- Weight: 24.00kg
Our ratings on 11-09-2025:

4.8 out of 5
4mm JCW Acoustic Barrier Mat
Width: 1200mm
Roll Coverage: 2.4m2
Density: 2500kg/m3
Weight/m2: 10kg
Weight: 24kg
4mm JCW Acoustic Barrier Mat is an acoustic barrier matting that offers very good airborne performance across the frequency range. It is a very versatile and dense product that is used for a wide range of applications where airborne sound reduction is required. The most common installation areas are floors, walls & ceilings.
- Very quick and simple to install,
- Noticeable improvements will be gained when bonding barrier matting between two layers of Plasterboard on walls & ceilings or pinning on to stud work or joists prior to plasterboard fixing,
- Noticeable airborne improvement gain with minimal height loss when 2 barrier matting layers are laid on the floor in opposite directions,
- Ideal as a separating curtain wall between offices above walls,
- Perfect product for dampening steelwork, ducting and machinery casings etc,
- Can be loose laid,
- Can be partially or fully bonded to the sub-floor.
- New build
- Refurbishments
- Domestic upgrade
- On floors, walls & ceilings.
Floors
- Cut the first row of matting continuously across the room up to the wall edges and if possible beneath the skirting boards if fitted.
- The second and subsequent rows should either be tightly butt edged or overlapped by 25mm to ensure optimum airborne performance.
- As JCW Barrier Matting is an impervious product the best adhesive to use for an instant bond is either a Spray Contact Adhesive for partial bond or trowel/spreader applied Contact Adhesive if full bonding is required.
- Contact adhesive should be spread immediately once applied to the JCW Barrier Matting.
- The JCW Barrier Matting can be installed in continuous vertical lengths with vertical joints centrally between the studs or metal work.
- Cut the first vertical length and secure centrally between the studs or metal work using a few Clout Nails.
- Then fix the plasterboard/s over ensuring all plasterboard joints and/or minor gaps are sealed with JCW Acoustic Sealant/Mastic.
CERTIFICATION
It has been independently tested in a UK Verified independent UKAS accredited laboratory. Pre-completion testing is not required.
Brand: JCW
Model and Size: 50mm-Free delivery
Delivery Time: 2 - 3 working days
50mm JCW Acoustic Isolating Strip is used for preventing sound transfer by isolating partitioning or party walls from ceiling and floorboards and also from joists that the floor is attached to. It can be used in all forms of construction where there is any point of contact. The strip is manufactured..
Guide Price: £23.26
£27.91 inc VAT
Brand: JCW
Model and Size: 1200mm x 600mm - 0.72m2
Delivery Time: 2 - 3 working days
30mm JCW Stonefloor Slab is made from dense mineral wool slab designed for use on concrete subfloors. It is a high compressive strength dual density slab, which provides high thermal insulation properties for ground floors and acoustic insulation properties for separating floors. JCW Stonefloor Slab..
Guide Price: £19.11
£22.93 inc VAT
Brand: JCW
Model and Size: 2400mm x 600mm - 1.44m2
Delivery Time: 2 - 3 working days
33mm JCW Acoustic Deck 33 is a Chipboard based acoustic overlay board for use with PCT timber floor constructions or as direct to joist board for timber floors. It is 18mm t&g chipboard laminated to a with a pre-bonded 15mm acoustic resilient foam layer.CHARACTERISTICSAn ideal solution where con..
Guide Price: £58.52
£70.22 inc VAT
Brand: JCW
Model and Size: 1200x600mm - 0.72m2
Delivery Time: 3 - 5 weeks
22mm JCW Acoustic Cement Particle Board is a high density T&G overlay acoustic board suitable for floors and ceilings, specially designed to add concentrated mass. Used where there is a requirement for a high performance result in acoustic control and fire retardance. Manufactured from Portland Ceme..
Guide Price: £44.65
£53.58 inc VAT
Brand: JCW
Model and Size: 150mm - Free Delivery
Delivery Time: 3 - 5 days
150mm JCW Acoustic Isolating Strip is used for preventing sound transfer by isolating partitioning or party walls from ceiling and floorboards and also from joists that the floor is attached to. It can be used in all forms of construction where there is any point of contact. The strip is manufacture..
Brand: JCW
Model and Size: JCW Acoustic Sealant
Delivery Time: 2 - 3 working days
JCW Acoustic Sealant is a high strength, permanently flexible white acoustic sealant and adhesive specifically formulated for sealing and bonding plasterboard. It is ideal for sealing the edges of plasterboard systems and filling and sealing any holes where services have been installed, thereby..
Guide Price: £4.50
£5.40 inc VAT