1.2mm JCW Acoustic Barrier Mat - 1.2m x 5m roll

Guide Price
1.2mm JCW Acoustic Barrier Mat - 1.2m x 5m roll
Guide Price: £59.13 (£70.96 inc VAT)
To add to cart change quantity to minimum of 15. If you need less, ask for a price or add to a quote list.
- Product Code: A1-1957
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model: 1200mm x 5000mm - 6.00m2
- Weight: 19.50kg
Our ratings on 13-11-2026:

4.8 out of 5
1.2mm JCW Acoustic Barrier Mat - 1.2m x 5m roll
Thickness: 1.2mm
Width: 1200mm
Roll Length: 5m
Density: 2700kg/m3
Weight/m2: 3.25kg
Weight: 19.5kg
1.2mm JCW Acoustic Barrier Mat is an acoustic barrier matting that offers very good airborne performance across the frequency range. It is a very versatile and dense product that is used for a wide range of applications where airborne sound reduction is required. The most common installation areas are floors, walls & ceilings.
- Very quick and simple to install,
- Noticeable improvements will be gained when bonding barrier matting between two layers of Plasterboard on walls & ceilings or pinning on to stud work or joists prior to plasterboard fixing,
- Noticeable airborne improvement gain with minimal height loss when 2 barrier matting layers are laid on the floor in opposite directions,
- Ideal as a separating curtain wall between offices above walls,
- Perfect product for dampening steelwork, ducting and machinery casings etc,
- Can be loose laid,
- Can be partially or fully bonded to the sub-floor.
- New build
- Refurbishments
- Domestic upgrade
- On floors, walls & ceilings.
Floors
- Cut the first row of matting continuously across the room up to the wall edges and if possible beneath the skirting boards if fitted.
- The second and subsequent rows should either be tightly butt edged or overlapped by 25mm to ensure optimum airborne performance.
- As JCW Barrier Matting is an impervious product the best adhesive to use for an instant bond is either a Spray Contact Adhesive for partial bond or trowel/spreader applied Contact Adhesive if full bonding is required.
- Contact adhesive should be spread immediately once applied to the JCW Barrier Matting.
Walls
- The JCW Barrier Matting can be installed in continuous vertical lengths with vertical joints centrally between the studs or metal work.
- Cut the first vertical length and secure centrally between the studs or metal work using a few Clout Nails.
- Then fix the plasterboard/s over ensuring all plasterboard joints and/or minor gaps are sealed with JCW Acoustic Sealant/Mastic.
It has been independently tested in a UK Verified independent UKAS accredited laboratory. Pre-completion testing is not required.
Brand: JCW
Model: JCW ASFP - 62.40m2
Delivery Time: 2 - 3 working days
JCW Acoustic Screed Foam Pack is a complete concrete floor under screed resilient layer pack containing JCW Acoustic Screed Foam, JCW Acoustic Flanking Strip and JCW Acoustic Flanking Strip. This is a big value acoustic foam pack which reduces impact and airborne noise on concrete floors. Acoustic ..
Guide Price: £285.68
£342.82 inc VAT
Brand: JCW
Model: 1200x600mm - 0.72m2
Delivery Time: 2 - 3 working days
18mm JCW Acoustic Cement Particle Board is a high density T&G overlay acoustic board suitable for floors and ceilings, specially designed to add concentrated mass. Used where there is a requirement for a high performance result in acoustic control and fire retardance. Manufactured from Portland ..
Guide Price: £38.41
£46.09 inc VAT
Brand: JCW
Model: 1200mm x 5000mm - 6.00m2
Delivery Time: 2 - 3 working days
1.2mm JCW Acoustic Barrier Mat is an acoustic barrier matting that offers very good airborne performance across the frequency range. It is a very versatile and dense product that is used for a wide range of applications where airborne sound reduction is required. The most common installation areas a..
Guide Price: £59.13
£70.96 inc VAT
Brand: JCW
Model: 1200mm x 4000mm - 4.80m2
Delivery Time: 2 - 3 working days
3mm JCW Acoustic Barrier Mat is an acoustic barrier matting that offers very good airborne performance across the frequency range. It is a very versatile and dense product that is used for a wide range of applications where airborne sound reduction is required. The most common installation areas are..
Guide Price: £74.87
£89.84 inc VAT
Brand: JCW
Model: 100mm
Delivery Time: 1-3 working days
100mm JCW Acoustic Isolation Strip is used for preventing sound transfer by isolating partitioning or party walls from ceiling and floorboards and also from joists that the floor is attached to. It can be used in all forms of construction where there is any point of contact. The strip is manufacture..
Guide Price: £24.97
£29.96 inc VAT
Brand: JCW
Model: 1m x 10m - 10.0m2
Delivery Time: 2 - 3 working days
4.5mm JCW Impacta 4551 Mat is an impact sound bonded surface layer for concrete floors made from recycled rubber bonded with cork granulate. It is suitable beneath most floor finishes e.g. laminate, carpet, vinyls and ceramic tiles. Impacta Mat 4.5mm when fully bonded to the sub-floor meets the Buil..
Guide Price: £111.33
£133.60 inc VAT